2351521270, 235-15-21270 PIN KOMATSU

Product Overview

The 235-15-21270 PIN KOMATSU is a code-specific Komatsu spare part that appears publicly under both 235-15-21270 and 2351521270, and public aftermarket listings identify the part simply as a PIN. That matters because buyers in this category usually search by exact part number first, then confirm the part type second. For an e-commerce product page, the right starting point is to present 235-15-21270 PIN KOMATSU as a machine-specific replacement part, not as a generic workshop pin.

The 235-15-21270 PIN KOMATSU also sits inside a useful public parts-family context. A Komatsu grader and dozer spare-parts list places this code in the same 235-15 sequence as discs, plates, gears, bushings, and bearings. That surrounding family strongly suggests that the part belongs to a transmission-related section rather than to a broad chassis or hardware category. This is important for search intent, because customers looking for 235-15-21270 PIN KOMATSU are usually matching an internal machine component, not browsing for a universal steel rod.

Design and Likely Function

From the uploaded images, the 235-15-21270 PIN KOMATSU has a long, straight, precision-machined body with a smooth outer surface and neatly finished ends. Visually, that form is much more consistent with an internal locating or retaining role than with a rough external hinge application. In practical service language, the 235-15-21270 PIN KOMATSU looks like a controlled-fit component intended to sit accurately inside a machined bore where stable positioning matters. The public 235-15 family context reinforces that reading because the same family is grouped with transmission-related parts.

The 235-15-21270 PIN KOMATSU should therefore be described as a precision internal Komatsu machine part used where alignment, retention, and repeatable support are important. Even when public catalogs keep the naming short, parts like this often play a real role in holding nearby components in the correct relationship during movement, vibration, and load changes. For buyers, that means the 235-15-21270 PIN KOMATSU is more important than its simple appearance may first suggest.

Technical Description

The 235-15-21270 PIN KOMATSU is best presented on your website as a precision-machined Komatsu steel pin intended for internal installation where fit accuracy matters. The visible geometry suggests a component made for controlled insertion rather than for rough external locking. That makes the 235-15-21270 PIN KOMATSU a strong candidate for transmission-family repair work, especially where the surrounding assembly depends on exact seating and low-tolerance alignment. Public listings confirm the exact code and the PIN designation, which is the most important identification point for industrial buyers.

For technical presentation, the 235-15-21270 PIN KOMATSU can be described as a long cylindrical steel pin with a polished outer finish, straight shaft profile, and installation-friendly end preparation. Those visible features help buyers recognize that the 235-15-21270 PIN KOMATSU is not generic hardware. It is a code-driven Komatsu part chosen for correct fit, reliable support, and stable mechanical positioning inside a transmission-family environment.

Estimated Weight

The 235-15-21270 PIN KOMATSU does not show a clearly published net weight in the public sources I reviewed, so the safest product-page approach is to label the weight as an estimate based on the uploaded images. For website use, I would present the 235-15-21270 PIN KOMATSU at an estimated net weight of approximately 0.18 kg. This gives buyers a practical reference for shipment planning while staying honest about the source of the number.

Compatible Komatsu Models

The strongest public model-family context for the 235-15-21270 PIN KOMATSU centers on Komatsu grader-related transmission applications. Komatsu’s official GD825A-2 page describes that grader as using a torque converter drive and automatic transmission, and public neighboring 235-15 family listings connect the same family with GH320-2, GD825A, GD825A-2E0, GD725A-1, and GD705A. Based on that visible family context, the most practical associated model group for the 235-15-21270 PIN KOMATSU is GD825A-2, GD825A, GD825A-2E0, GD725A-1, GD705A, and GH320-2. Final fitment should still be confirmed by machine model and serial number before shipment.

Why Accurate Fit Matters

The 235-15-21270 PIN KOMATSU should always be matched by exact part number when possible. Internal machine parts do not need to look complex to be critical. If the wrong pin is installed in place of the 235-15-21270 PIN KOMATSU, the result can be poor seating, unwanted play, extra wear, or repeat labor when the assembly has to be reopened. In real workshop conditions, the cost of using an incorrect part is usually much higher than the cost of ordering the right one the first time.

The 235-15-21270 PIN KOMATSU is exactly the sort of part that becomes urgent only when the machine is already open and the repair cannot continue without it. That is why buyers search the exact code, why SEO matters for this product, and why the page should keep the phrase 235-15-21270 PIN KOMATSU visible in plain text. A clean, exact-code product page reduces hesitation and helps the buyer confirm the match faster.

Why Buyers Replace It

The 235-15-21270 PIN KOMATSU is most likely to be replaced during transmission inspection, clutch-related service, rebuild work, or preventive maintenance when the surrounding assembly is already disassembled. The removed part may show scoring, polished wear, minor bending, or uncertain service history. Even when the original part is not fully failed, workshops often replace the 235-15-21270 PIN KOMATSU during service because reopening the same section later would cost more in downtime and labor.

3GEN Export Supply Advantage

At 3GEN Export, we supply the 235-15-21270 PIN KOMATSU as an OEM supplier for heavy machinery buyers who need clear identification and fast international dispatch. The commercial message should stay practical: the 235-15-21270 PIN KOMATSU is available with worldwide delivery in 5 working days. That matters for fleet managers, workshops, traders, and resellers because a machine waiting on a small internal part is still a machine out of service.

Conclusion

The 235-15-21270 PIN KOMATSU is best positioned as a precision internal Komatsu spare part used in a transmission-family environment where fit accuracy, retention, and stable alignment matter. Public listings confirm the exact code and PIN designation, while the broader 235-15 family places the part in the same context as transmission-related discs, plates, gears, bushings, and bearings. That gives the 235-15-21270 PIN KOMATSU the right commercial identity for a focused SEO product page aimed at real industrial buyers.