FYD00006295 Airman Cabin Glass

Introduction to the Product

The FYD00006295 Airman Cabin Glass is a precision-engineered glazing panel designed to restore clear visibility and structural integrity to your operator cabin. As a critical element of the Cabin Glasses family within Cabin & Operator Components, this panel safeguards the operator from dust, debris, wind, and noise while maintaining sightlines for accurate maneuvering on congested, high-risk worksites. Manufactured to stringent dimensional tolerances and safety standards, FYD00006295 is engineered for durability, optical clarity, and a reliable fit that minimizes installation time and machine downtime. At 3GEN Export, we support the full lifecycle of your Airman machines with consistent, professional spare-parts logistics. This FYD00006295 Airman Cabin Glass is an OEM-grade solution sourced through our vetted supply network, verified for edge finish, hole patterns (where applicable), and curvature to match the original profile. Whether you are solving a breakage incident, refreshing a worn panel, or standardizing your fleet maintenance plan, FYD00006295 delivers long-term value with dependable performance in construction, utility, and light mining environments.

Technical Specifications

Below are the key technical details converted into both metric and imperial units for fast engineering reference. Where manufacturer tolerances apply, values are stated as approximations suitable for planning, procurement, and installation.

• Part Number: FYD00006295
• Alternative P/N: FYD00004973
• Brand: Airman
• Category: Cabin Glasses
• Estimated Weight: 14 kg / 30.86 lbs
• Estimated Size (L × H × T): 150 × 100 × 2 cm  |  59.06 × 39.37 × 0.79 in
• Material: Safety-rated tempered or laminated glass (application-dependent)
• Edge Finish: Polished safety edge with radius corners for stress mitigation and safe handling
• Surface: High optical clarity; optional light-tint glazing where model-specific
• Mounting: Direct-fit panel designed to match OEM hole pattern/retainer profile (model-dependent)
• Environmental Resistance: Impact-resistant to common job-site debris; temperature and UV exposure tolerant
• Quality Standard: Produced under OEM-equivalent QA with dimensional tolerance suitable for cab sealing systems

The glass thickness is sized to balance mass, stiffness, and energy absorption characteristics. Approximate conversion factors used: 1 kg = 2.20462 lbs; 1 cm = 0.393701 in. Final mass can vary slightly with hole/slot count, bonding method, and any optional film or tinting used by specific Airman models.

Compatibility and Application

FYD00006295 is supplied for use on Airman operator cabins and is widely compatible across Airman machinery used in construction, utilities, material handling, and light mining. Where exact model matching is required, please cross-check with your machine serial number and cab configuration, or consult our support team for a fitment confirmation prior to dispatch. The panel is intended to replace damaged or worn cabin glazing while maintaining cabin pressurization and visibility envelopes designed by the OEM.

Key Features and Advantages

• Clear, distortion-free visibility: Optical-quality glazing helps operators read terrain, trench edges, bucket positions, and proximity hazards with confidence.
• Direct-fit geometry: Profiled to OEM outlines for a clean seat in gaskets, retainers, or clamp frames, reducing install time.
• Safety-oriented construction: Tempered or laminated glass architecture improves impact behavior and fragmentation characteristics.
• Durable edge and surface finish: Polished edges and robust surface finish reduce crack initiation from handling or vibration.
• Stable in harsh environments: Formulated to tolerate UV exposure, temperature swings, and vibration typical of job-site duty cycles.
• Reduced downtime: Reliable fitment streamlines replacement and keeps assets productive.
• Cost-efficient OEM alternative: Quality and consistency that align with fleet standards while optimizing total cost of ownership.

Installation and Maintenance Guide

Pre-installation checks: Power down the machine, lock out/tag out per your safety policy, and park on level ground. Inspect the frame aperture for burrs, old adhesive, or gasket damage. Trial-fit the panel dry to confirm outline and hole alignment. Use proper lifting aids or a second technician when handling glass to avoid point loads at corners. Sealing and mounting: If your Airman cab uses a gasketed system, renew the gasket if it shows compression set, nicks, or hardening. For bonded systems, use an OEM-approved polyurethane adhesive and primer set. Maintain the adhesive bead height per the gun tip specification to ensure correct standoff and uniform stress distribution. Avoid over-clamping; follow the torque values specified by your cab manual for retainer frames or hardware to prevent edge stress and potential micro-cracking. Surface care: Clean with pH-neutral detergents and soft, non-abrasive cloths. Avoid aggressive solvents or dry-wiping dust-covered glass, which can cause micro-scratches. Where wipers contact the panel, ensure blades are in good condition and washer fluid is topped up to reduce abrasion. Inspection interval: Incorporate cabin glass checks into weekly preventive maintenance. Look for chips along edges, localized star cracks, or sealant failures, especially after high-vibration tasks or rock-throw events. Early repair or replacement preserves cabin pressurization and operator comfort.

Why Choose 3GEN Export

• OEM-grade supply, verified quality: Every FYD00006295 panel is sourced from trusted manufacturers and checked for dimensional accuracy and finish.
• Worldwide delivery in 5 working days: Our logistics network prioritizes quick, predictable lead times to minimize machine downtime.
• 1-year manufacturer warranty: Confidence in material integrity and workmanship under normal operating conditions.
• All prices include shipping: Transparent landed costs for easier budgeting and procurement.
• Trusted by global contractors: 3GEN Export supports fleets across construction, utilities, and mining with consistent spare-parts availability.

Conclusion

The FYD00006295 Airman Cabin Glass brings clear visibility, robust construction, and dependable fitment to your operator station. As a direct-fit panel within our Cabin Glasses range for Airman, it supports safer, more precise operation across demanding jobsites. Order your Cabin Glass Airman spare part (FYD00006295) from 3GEN Export today — OEM quality, global delivery in just 5 working days.

Technical Data Table

Specification	Value
Part Number	FYD00006295
Alternative P/N	FYD00004973
Brand	Airman
Product Name	Cabin Glass
Weight	14 kg / 30.86 lbs
Size	150 × 100 × 2 cm / 59.06 × 39.37 × 0.79 in
Material	Tempered or laminated safety glass (application-dependent)
Category	Cabin Glasses
Compatible Models	Widely compatible across Airman machinery used in construction, utilities, and light mining (confirm via serial/cab spec)
Warranty	1 Year OEM Warranty
Delivery Time	5 Working Days
Supplier	3GEN Export

Related Products

• FYD00006272 Airman Cabin Glass
• FYD00006282 Airman Cabin Glass
• View all Airman Spare Parts
• Explore all Cabin Glasses

Airman Models;

AX 33, 38, 48, 52, 55, U-5

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.