3115600116 / 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO

If you’re rebuilding or servicing an Atlas Copco/Epiroc rock drill where piston alignment and smooth percussion matter, the 3115600116 (also written as 3115 6001 16) is one of those “small part, big impact” components. The 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO sits at the rear guidance area of the drifter assembly and acts as the precision wear surface that keeps the piston running true under high cyclic loads and harsh drilling conditions.

At 3GEN Export, we supply this component as an OEM supplier with worldwide delivery in 5 working days, helping you minimize downtime without compromising fit and function.

What the 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO actually does

A drifter piston doesn’t just move back and forth; it does so under extremely high impact energy, changing pressure, heat, and contamination risk. The role of the 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO is to:

• Support piston alignment at the rear guidance zone so the piston remains concentric with the bore.

• Provide a controlled sliding surface that reduces metal-to-metal contact where it shouldn’t occur.

• Handle side loads and vibration created by drilling shocks and tool string dynamics.

• Promote stable lubrication through its internal grooves and lubrication features (as visible in the part geometry), helping oil distribute evenly around the contact surface.

• Protect expensive housings by taking wear on a replaceable guide instead of the main body.

In short, when the 3115600116 PISTON GUIDE REAR ATLAS COPCO is in good condition, you typically get smoother operation, better energy transfer consistency, and longer service life for the rest of the back-end components.

Key benefits for maintenance teams and drill owners

Choosing the right 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO is about measurable outcomes in the field:

Longer service intervals

A correctly fitted piston guide rear helps reduce uneven scoring and “oval wear” patterns that can accelerate failure in neighboring components.

Cleaner motion, fewer performance losses

As clearances grow, efficiency drops—impact energy becomes less controlled and heat increases. Replacing the 3115600116 PISTON GUIDE REAR ATLAS COPCO at the right time helps keep the drifter operating closer to spec.

Protection of high-cost assemblies

It’s far cheaper to replace a guide than to repair a housing or back head area that has been damaged by misalignment.

Better lubrication behavior

The visible internal groove pattern supports oil film stability during repeated high-speed cycles, especially when conditions aren’t ideal.

Construction cues from the part design

From the images, this component shows the typical geometry of a rear guide/bushing style part:

• Copper/bronze-colored alloy appearance (common in high-load sliding applications)

• Internal lubrication grooves to distribute oil and reduce friction

• A flange/step geometry to seat precisely in the rear location

• A lubrication port/hole visible in some angles, supporting oil feed

Because precise metallurgy and dimensions depend on the exact build standard and batch, the safest way to present specs online is to describe functional characteristics rather than publishing unsupported micron-level claims.

Technical overview and specifications (practical, website-ready)

Below is a practical spec set you can publish without inventing hard dimensions:

Technical details (typical for this component type)

• Part number (continuous): 3115600116

• Part number (spaced): 3115 6001 16

• Part name: Piston Guide Rear

• Placement: Rear piston guidance area (rear guide position)

• Function: Alignment, wear surface, friction control, lubrication support

• Design features: Internal lubrication grooves, seating shoulder/flange, lubrication port

• Application family: Rock drill / drifter rear-end guidance components

Weight

• Approx. weight: 0.5 kg

(Weight can vary slightly by production tolerance and packaging; the value above is a reliable listing reference.)

Where the 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO is used (models)

Based on published spare-parts catalog references and listings, 3115 6001 16 appears in the COP 3060 drifter family, including catalog entries for COP 3060MEX.

Confirmed application (catalog/listing-supported)

• COP 3060

• COP 3060MEX

Important: rock drills can differ by configuration and serial range, so the best practice is always to match by part numberand (when possible) drifter variant/serial before purchase.

How to diagnose wear and decide when to replace

A worn 3115600116 PISTON GUIDE REAR ATLAS COPCO usually reveals itself through symptoms that are easy to miss if you’re only watching for catastrophic failure.

Common indicators

• Increased vibration or irregular percussion feel

• Oil discoloration or metallic particles appearing sooner than normal

• Abnormal scoring patterns on piston surfaces

• Noise changes (especially at certain feed pressures)

• Back-end leakage patterns that worsen after seal replacement (because alignment is still off)

Inspection tips (field-practical)

• Clean the part thoroughly and inspect for scoring, uneven polishing, and edge chipping.

• Check the internal grooves: if they’re flattened or clogged with embedded debris, lubrication performance drops.

• Look for out-of-round wear (visual clues: uneven shine bands).

• If you have measurement tools, compare ID wear to service limits in the relevant manual/catalog for your drifter variant.

Installation guidance (high-level steps)

Below is a safe, non-brand-specific procedure you can publish as an “installation overview” without claiming it replaces an official service manual.

Step-by-step overview

1. Isolate and depressurize the drill system; follow site safety procedure.

2. Disassemble the rear-end section to access the rear guide location.

3. Clean the housing bore and oil channels—a new 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO will not perform well if debris remains.

4. Inspect the seating surfaces for scoring or burrs; correct any damage that would prevent proper seating.

5. Pre-lubricate the guide (light oil film) and align any oil feed hole with the housing’s lubrication path (if applicable to your configuration).

6. Press/fit the guide carefully using proper tooling so you don’t distort the guide or the housing.

7. Reassemble with new seals where required and torque to the correct values.

8. Test at controlled settings first, checking temperature, oil flow, and stability before returning to full load.

Why buying from 3GEN Export helps

When your drill is down, lead time becomes as important as the part itself. With 3GEN Export, you get:

• OEM supplier sourcing approach

• Fast worldwide delivery in 5 working days

• Export-ready packing and shipment planning suitable for industrial maintenance timelines

• A product listing built for clear part-number matching (3115600116 and 3115 6001 16) so your customers can find it in multiple search formats

SEO notes you can safely include (without over-repeating)

To keep keyword density healthy (1–2%), use the full phrase strategically in key zones:

• H1 + first paragraph

• One mid-body paragraph

• Specs section

• Compatibility section

• Ordering/shipping section

• A few natural mentions across the text

That way the 3115600116 PISTON GUIDE REAR ATLAS COPCO and 3115 6001 16 PISTON GUIDE REAR ATLAS COPCO variations both rank without spamming the page.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.