15269308 Front Bushing Sandvik (152 693 08) | OEM-Standard Replacement by 3GEN Export

When a rock drill starts losing accuracy, overheating at the nose, or showing abnormal vibration, the root cause is often simple: the front-end guidance is no longer doing its job. The 15269308 Front Bushing Sandvik is one of the core wear components that keeps the drill’s rotating parts aligned where the impact energy is highest. This part is also searched as 152 693 08 and is commonly listed as a front bushing / front bearing depending on supplier terminology.

At 3GEN Export, we supply this part as an OEM-standard solution built to match the functional requirements of the drifter. It is produced for demanding drilling cycles and consistent alignment, and we ship worldwide in 5 working days.

What the 15269308 Front Bushing Sandvik Does

The 15269308 Front Bushing Sandvik sits at the front housing area of the rock drill/drifter and acts as a precision guide surface. In plain terms, it is the “front support” that keeps rotating and moving elements centered under heavy load. That matters because a drifter is not just spinning; it’s also transmitting repeated impact energy, and the front end experiences constant metal-to-metal stress.

A healthy 15269308 Front Bushing Sandvik helps you achieve:

• Stable alignment at the nose (better hole straightness)

• Lower vibration transfer to the body

• Reduced abnormal wear on adjacent parts

• More predictable lubrication behavior at the working end

• Longer service intervals in high-duty drilling

This is why replacing the front bushing on time is one of the most cost-effective ways to protect the rest of the assembly.

Where 152 693 08 Fits

Online part listings show 152 693 08 used with Sandvik/Tamrock HLX5T rock drill & drifter applications and referenced for certain underground rig configurations (commonly associated with Axera D07 260 listings).

In other words, if you are servicing an HLX5T-based setup and your maintenance list includes 15269308, you are looking at the correct front-end bushing component family for that platform.

Key Benefits of Using an OEM-Standard 15269308 Front Bushing Sandvik

Consistent Fit to Protect Mating Components

The 15269308 Front Bushing Sandvik is only “cheap” if it protects the expensive pieces around it. Poor tolerances can accelerate wear on the front housing area, increase vibration, and trigger premature failure patterns. An OEM-standard build focuses on dimensional stability and surface quality to keep the assembly running smoothly.

Better Drilling Accuracy and Tool Life

Front guidance affects how energy is delivered to the tool and how the tool tracks. A worn or incorrect 15269308 Front Bushing Sandvik can contribute to wandering holes, uneven bit wear, and reduced penetration efficiency. Restoring the proper guide surface brings the system back to a more stable operating condition.

Wear Resistance Where It Matters Most

Front bushings live in a harsh zone: dust, vibration, repeated impact, and lubrication stress. A properly manufactured 15269308 Front Bushing Sandvik is designed to handle continuous duty cycles and resist surface damage that leads to play and misalignment.

Visual Notes Based on the Part Type (From Your Images)

Your images show a heavy-duty cylindrical bushing construction typical for front-end guidance components. The design indicates:

• A robust outer body made for housing fit and stability

• An internal guiding surface where the working shaft/assembly is supported

• Machined features for correct seating and lubrication behavior (depending on drifter design)

This matches what buyers expect when searching for 15269308 / 152 693 08 in HLX5T spare part categories.

Technical Overview (General, OEM-Standard Expectations)

Because OEM drawings and exact dimensions can vary by configuration, below are the practical, buyer-friendly specs that matter in the field for a 15269308 Front Bushing Sandvik:

Material & Build

• OEM-standard alloy selection suitable for high-load guidance

• Precision machining for stable seating and concentricity

• Surface finish engineered to support lubrication film and reduce scuffing

Functional Characteristics

• High wear resistance for continuous percussion/rotation duty

• Dimensional stability under heat and repeated load cycles

• Designed to minimize play at the front end

Quality Control Checks (What We Validate)

• Diameter and roundness consistency

• Seating face quality

• Internal bore finish and alignment

• Visual inspection for machining defects

If you share your machine serial/model variation, we can also confirm the best matching production specification for your exact build.

Common Symptoms When 15269308 Needs Replacement

If your team is unsure whether the 15269308 Front Bushing Sandvik is the culprit, these are the field signals that often point to it:

• Increased nose vibration or “rattling” feel

• Noticeable play at the front end during inspection

• Faster-than-normal wear of related front-end parts

• Reduced drilling accuracy (hole deviation)

• Heat marks or discoloration near the bushing area

• Lubrication turning dirty unusually fast (fine metal contamination)

Front-end wear compounds quickly. Replacing 15269308 on schedule can prevent a small part from turning into a full assembly repair.

Installation Guidance for 152 693 08 (Workshop-Friendly)

Before Installation

• Clean the housing bore completely (remove debris, old lubricant residue, and burrs)

• Inspect the housing for scoring, ovality, or damage

• Check mating parts for abnormal wear patterns (don’t install a new bushing into a damaged environment)

Installation

• Use correct press tools to avoid distortion

• Keep the bushing aligned during seating (tilt creates damage before the machine even runs)

• Confirm the seating face is fully and evenly seated

After Installation

• Apply the correct lubrication type and confirm flow

• Perform a short controlled run and re-check temperature and vibration

• Re-inspect after initial operating hours if the environment is highly abrasive

If you want, tell me your rig/drifter setup (HLX5T variant, serial, or service manual reference) and I’ll tailor the installation checklist to your exact configuration.

Compatibility (Online-Referenced)

Based on online spare-part listings:

• Rock Drill / Drifter: HLX5T

• Underground Drill Rig listings referencing HLX5T parts: Axera D07 260

If you also have alternative part numbers or a service list screenshot, I can cross-check additional compatible configurations.

Estimated Weight (KG)

• Approx. weight: 3.8 kg (typical for this front bushing class; can vary by production batch and exact spec)

If you share the OD/ID/length (or the packaging label dimensions), I can tighten the estimate.

Why Buy From 3GEN Export

You’re not just buying a wear part—you’re buying uptime.

• OEM-standard manufacturing approach to match functional requirements

• Global delivery in 5 working days

• Support for part-number confirmation using 15269308 and 152 693 08 search variants

• Bulk supply capability for maintenance programs and stock planning

When customers search 15269308 Front Bushing Sandvik, they usually need it fast and they need it to fit right. That’s exactly what we optimize for.

Ordering Keywords and Search Variations

Customers find this item using different formats. These are the most common:

• 15269308 Front Bushing Sandvik

• 152 693 08 Front Bushing Sandvik

• Sandvik/Tamrock HLX5T front bushing 152 693 08

Using both spaced and unspaced formats on your product page helps capture more search intent without repeating the main keyword excessively.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.