Loading article…
Article Not Found
The article you're looking for doesn't exist or may have been removed.
Back to BlogCaterpillar Oil Filter Cross Reference Charts & Guide
Caterpillar oil filter cross reference is the process of matching a Cat OEM part number to a verified aftermarket equivalent from brands like Wix, Baldwin, Donaldson, Fleetguard, or Fram. Always confirm thread size, gasket diameter, bypass valve setting, and efficiency grade before installing any substitute.
Key Takeaways
- The official Cat Filter Cross Reference Tool accepts up to 50 competitor part numbers at once and searches by machine model or serial number prefix.
- Always match thread size, gasket diameter, bypass valve pressure, and efficiency grade - physical fit alone does not guarantee correct filtration.
- Cat classifies oil filters into standard, advanced, ultra-high, and UHE+ all-metal grades; using the wrong grade can reduce engine protection even if the filter threads on.
- The Cat 1R-0734 advanced high efficiency filter crosses to Wix 51261, Baldwin BT355/BT364, NAPA 1261, Donaldson P555680/P559017, Fleetguard LF3788/LF654, and Fram PH36A, among others.
- For 3500 series engines, application type (machine vs. captive) determines the correct filter; 1R-0726 is preferred for captive electric power, marine, and pump engines.
- Marine Cat engines use white-painted variants (479-0855, 479-0856) that are otherwise identical to standard filters 438-5385 and 438-5386.
Why Caterpillar Oil Filter Cross Reference Matters

Protecting High-Pressure Diesel and Hydraulic Systems
A correct cross reference is the first line of defense against abrasive particle damage in high-pressure diesel and hydraulic systems. According to Caterpillar, Cat Engine Oil Filters decrease system contamination to help avoid premature plugging, making them an excellent choice to extend oil drain intervals and increase performance for critical high-pressure systems. A reliable cross reference helps you find aftermarket filters that deliver comparable protection without sacrificing engine cleanliness. Get it wrong, and you risk accelerated wear on components that cost far more than the filter itself.
OEM vs. Aftermarket: What Changes When You Swap
A this type of reference is a mapping between a Cat OEM part number and an aftermarket equivalent - but equivalent does not always mean identical. Genuine Cat filters use spiral roving to retain more contaminants, urethane end caps to seal the filter media and prevent leak paths, and a non-metallic center tube to eliminate the possibility of metal contamination, per Caterpillar's published product specifications. Aftermarket filters may not replicate all of these design elements. Community discussions frequently claim that Baldwin manufactures Cat filters at its Kearney, Nebraska facility, and that some Cat part numbers are Baldwin filters painted yellow. Caterpillar has not officially confirmed this, so treat it as field observation rather than verified fact.
Efficiency Grades and Emission Requirements
Matching the efficiency grade is as critical as matching the physical dimensions. Cat classifies oil filters into four grades: standard efficiency (for engines manufactured before 2004, prior to emission regulations requiring advanced media), advanced efficiency (enhanced filtration for smaller, more damaging particles in sensitive systems), ultra-high efficiency (the most advanced media for increased efficiency while maintaining capacity), and UHE+ all-metal (a one-piece metal can that collects separated water internally, eliminating the need for an external water bowl). When running a this kind of cross reference, matching the efficiency grade required by your engine's service manual is non-negotiable.
How the Official Cat Filter Cross Reference Tool Works

The official Cat Filter Cross Reference Tool is the most authoritative starting point for any the oil filter cross reference because it draws directly from Caterpillar's own database.
Three Search Tabs: Competitive Part, Machine Model, Serial Number Prefix
The tool offers three main tabs: Cross reference, Cat machine model, and Cat serial number prefix. Using the cross reference tab, you can search for a Cat filter using a competitive part number. According to CatFilterCrossReference.com, the tool accepts entering or pasting up to 50 competitor part numbers at once. The Cat machine model tab lets you input the machine or engine model and narrow results by serial number prefix or filter type. The Cat serial number prefix tab accepts the machine or engine serial number prefix and can be refined by filter type. For any site issues, contact [email protected].
Building Shopping Lists and Buying Genuine Cat Filters
Once your filter list appears, click the yellow shopping cart icon to purchase a single filter directly through parts.cat.com. For multiple filters needed at a maintenance interval, click the blue cart icon to build a parts shopping list. The shopping list gives you two options: "Buy Now" through parts.cat.com or "Export" to save for a later purchase. This workflow makes it straightforward to plan a full machine service without losing track of part numbers.
New Filter Types Added: Screen, Breather, and Strainer
The updated Cat Filter Cross Reference Tool added filter types including screen, breather, and strainer filters to the searchable list, which already covers engine oil, engine air, fuel, fuel water separator, hydraulic, transmission, and cabin filters. This means you can cross reference an entire machine's filtration suite in a single session rather than hunting across multiple catalogs.
1R-0714 vs. 1R-0734: Naming Discrepancy to Know
Industrial Stop's cross reference page references the filter as both "1R-0714" and "1R-0734" in different sections. The correct, widely published part number is 1R-0734. If you encounter 1R-0714 in a catalog or cross reference chart, verify against the Cat tool or your machine's parts book before ordering. A single digit difference can mean a completely different filter specification.
Caterpillar Oil Filter Cross Reference Charts by Popular Part Number

The table below lists common Cat oil filter part numbers, aftermarket cross references drawn from published charts, and application notes. Always verify dimensions and efficiency grades using the official tool before purchase.
| Cat Part Number | Aftermarket Cross References | Key Application Notes |
|---|---|---|
| 1R-0734 | Wix 51261; Baldwin BT355, BT364; NAPA 1261; Donaldson P555680, P559017; Fleetguard LF3788, LF654; Fram PH36A; AC-Delco PF1031A, PF898; Motorcraft FL 223, FL 78; Mann Filter W940/5; Purolator L30054; Hastings FP352 | Advanced high efficiency filter; fits Skid Steer Loader models 252B, 287B, 262C, 236B, 248B, 297C, 272C, 262B, 256C, 277C, 246B, 287C, 246C, 267B, 279C, 268B, 289C, 277B, 299C. Meets stricter emission requirements; upgrade over standard efficiency. |
| 2672528 | Baldwin B7131; Donaldson LFP502458; Fleetguard LF3828; Carquest 84106; Big A Filter 91106; Clark Equipment 920519; ALCO Filters SP841; Champion Laboratories LFP3828 | Caterpillar Lift Trucks; Mitsubishi Engines. Thread: 1 in., 12 TPI; Length: 4 1/32 in. (102.4 mm); OD: 4 1/4 in. (108.0 mm). Package qty: 12. |
| 377-6969 | No official aftermarket cross published in reviewed sources | Field reports indicate same face and thread as 220-1523 but more filtering media. Verify with Cat dealer before substituting on Cat 257B. |
| 1R-0726 | Verify via official Cat tool | Preferred replacement for captive 3500 series engines in electric power, marine, and pump applications. |
| 275-2604 | Verify via official Cat tool | Current factory first-fit spin-on filter for 3500 series machine applications. |
1R-0734 Advanced High Efficiency Oil Filter Cross Reference
According to Industrial Stop's cross reference chart, the Cat 1R-0734 Advanced High Efficiency Engine Oil Filter crosses to a wide range of aftermarket part numbers. The full list includes AC-Delco PF1031A, PF1031AF, PF898; Baldwin BT355, BT364; CARQUEST 85261; CASE 28006, H411272; Donaldson P555680, P559017; Fleetguard LF3788, LF654; Fram PH36A; Hastings FP352, LF352; John Deere AM107481; Mann Filter W940/5, WD940/2; Motorcraft FL 223, FL 78; NAPA 1261; Purolator L30054, L39260; and Wix 51261. This filter meets stricter emission requirements and serves as an upgrade for standard efficiency filters on the skid steer models listed above.
1R-1808 and Other Heavy-Duty Cat Oil Filters
The 1R-1808 appears frequently in reference searches, particularly for NAPA equivalents. The competitor evidence reviewed does not include a verified NAPA cross reference for the 1R-1808, so we recommend using the official Cat cross reference tool: input the Cat part number or machine serial prefix, then cross-check with NAPA's online catalog directly. The same process applies to 081-4661 and 220-1523, which appear in Industrial Stop's catalog but without full chart data in the sources reviewed here.
Cat 2672528 Lift Truck and Mitsubishi Engine Cross Reference
The Caterpillar 2672528 oil filter is used on Caterpillar lift trucks and Mitsubishi engines. According to the EXCO Filter cross reference page, the equivalent spin-on filter LX19737 has a thread size of 1 inch at 12 threads per inch, a length of 4 1/32 inches (102.4 mm), and an outside diameter of 4 1/4 inches (108.0 mm), with a package quantity of 12. The chart lists aftermarket brands including ALCO Filters SP841, ASV Inc. 2045752, Baldwin B7131, Big A Filter 91106, Carquest 84106, Champion Laboratories LFP3828, Clark Equipment 920519, Donaldson LFP502458, and Fleetguard LF3828. This dimensional data is critical: thread pitch and canister diameter must match exactly, or you risk leaks under operating pressure.
Pros and Cons of Using Aftermarket Caterpillar Oil Filter Cross References

Pros
- Cost savings: Aftermarket filters from Baldwin, Wix, Donaldson, and Fleetguard are typically available at lower price points than OEM Cat parts, which matters across large fleets.
- Wider availability: Brands like NAPA, Fram, and Wix are stocked at local distributors worldwide, reducing lead times when a Cat dealer is not nearby.
- Established cross reference data: Major aftermarket manufacturers publish detailed caterpillar oil charts with dimensional specs, making verification straightforward.
- Multiple sourcing options: A single Cat part number often crosses to filters from six or more brands, giving procurement teams flexibility when one brand is out of stock.
Cons
- Efficiency grade gaps: Not all aftermarket filters replicate Cat's advanced or ultra-high efficiency media. A filter that fits physically may not meet the filtration standard your engine requires.
- Bypass valve variation: Cross reference charts rarely publish bypass valve pressure ratings. An incorrect bypass setting can allow unfiltered oil to circulate or starve the engine during cold starts.
- Warranty risk: Using non-OEM filters on equipment still under Caterpillar warranty may affect warranty coverage. Confirm with your Cat dealer before substituting.
- Design differences: Genuine Cat filters use spiral roving, urethane end caps, and a non-metallic center tube. Aftermarket equivalents may not replicate all of these features.
Aftermarket Cross Reference Sources: Baldwin, Wix, Donaldson, Fleetguard, Fram, NAPA
Several aftermarket manufacturers publish cross reference charts, but each has its own search interface and data depth.
Baldwin Filter Finder
Baldwin Filters operates a cross reference tool called Filter Finder, which lets you search by competitor part number or by application. According to Baldwin Filters, the company is located at 4400 E Highway 30, Kearney, NE 68847, with support available at 308.234.1951 or 800.822.5394. Baldwin is a Parker Hannifin brand. The Filter Finder also supports VIN number search for application-based lookups, which is useful when you have a vehicle identification number but not a filter part number. Several field technicians report that Cat part numbers like 396-4596 correspond to Baldwin BT7349 painted Cat yellow. Caterpillar has not officially confirmed this relationship, but it reflects common field experience across heavy equipment fleets.
Wix and NAPA Cross Reference Charts
Wix and NAPA filters often share part numbering through their established distribution relationship. For the Cat 1R-0734, the published Wix equivalent is 51261 and the NAPA equivalent is 1261. Community sources cite Wix 51394 as a common equivalent for many Cat engines, though this is not universal and must be verified by application. For Bobcat CT2025 and CT2035 compact tractors, Wix 51381 is the oil filter equivalent, and the Bobcat 7384298 oil filter also crosses to Wix 51381. Always confirm with current Wix and NAPA catalogs before ordering.
Donaldson, Fleetguard, and Fram Equivalents
Donaldson, Fleetguard, and Fram all publish cross references for Caterpillar oil filters. For the 1R-0734, Donaldson P555680 and P559017, Fleetguard LF3788 and LF654, and Fram PH36A are listed by Industrial Stop. For the 2672528, Donaldson LFP502458 and Fleetguard LF3828 are published. Fram PH4967 and Mobil1 M1-103A are frequently mentioned in community discussions as direct swaps for smaller Cat and compact equipment engines, though these should be verified against current catalogs before use.
"Cat Engine Oil Filters are designed to work in harmony with Cat Fluids and S·O·S Services to help enhance the performance of your equipment." - Caterpillar, Official Engine Oil Filters Product Page
"These filters decrease system contamination to help avoid premature plugging. This makes them an excellent choice to extend your oil drain intervals and increase performance for your critical high-pressure systems." - Caterpillar, Official Engine Oil Filters Product Page
Step-by-Step Process to Verify Any Caterpillar Oil Filter Cross Reference
Follow these steps to verify any this type of reference from any source before committing to a purchase.
Step 1: Identify the Existing Cat Part Number or Machine Serial Prefix
Look at the old filter you removed or your Cat parts book to find the exact Caterpillar part number. If the filter is missing or illegible, locate the machine serial number prefix on the engine data plate or machine frame. Write down the prefix exactly. Many Cat models use different filters depending on serial number breaks, so precision here prevents ordering the wrong part entirely.
Step 2: Search Official and Aftermarket Cross Reference Tools
Open the official Cat Filter Cross Reference Tool and select the Cross reference tab if you have a competitor part number, or the Cat machine model or Cat serial number prefix tab if you have Cat identification. Enter up to 50 competitor part numbers at once. Then check aftermarket finders such as Baldwin Filter Finder, Wix, Donaldson, and Fleetguard to see their listed equivalents. Compare results from at least two independent sources before finalizing your this kind of cross reference selection.
Step 3: Confirm Dimensional and Performance Specifications
Collect the technical specifications for both the Cat filter and the aftermarket candidate. Key dimensions include thread size and pitch, gasket outside diameter, overall length, and can outside diameter. As a reference point, the Cat 2672528 filter has a 1-inch thread at 12 threads per inch, a length of 4 1/32 inches (102.4 mm), and an OD of 4 1/4 inches (108.0 mm). Verify the bypass valve pressure rating matches the engine's specification. Confirm the efficiency grade: standard, advanced, ultra-high, or UHE+ all-metal. A filter with the wrong efficiency grade reduces protection even if it threads on without issue.
Common Caterpillar Oil Filter Cross Reference Mistakes to Avoid
Ignoring Thread Size and Gasket Seat
The most common mistake is assuming that because two filters look similar, they are interchangeable. Thread size and pitch are not standardized across all Cat engines. A filter with a 1-inch by 12 TPI thread will not fit a mount designed for a metric thread. The gasket outside diameter must seat properly on the filter head; an oversized or undersized gasket can leak under pressure. Always measure or verify from the manufacturer's specification sheet before installing any the oil filter cross reference candidate.
Overlooking Bypass Valve Pressure Ratings
Every oil filter has a bypass valve that opens when the filter media becomes clogged or when oil is cold and thick. The opening pressure is calibrated to the engine's oil system. An aftermarket filter with a lower bypass setting may allow unfiltered oil to circulate prematurely. A higher setting may keep the bypass closed too long and starve the engine of oil during cold starts. Cross reference charts rarely list bypass valve pressure, so consult the filter manufacturer's technical data sheet directly.
Assuming All Aftermarket Filters Meet Cat Efficiency Grades
Not all aftermarket filters with the same physical dimensions provide the same filtration efficiency. Cat classifies filters into standard, advanced, ultra-high, and UHE+ all-metal grades. Standard efficiency filters are intended for pre-2004 engines, while advanced and ultra-high filters capture smaller particles required by emission regulations. A reference that lists a standard efficiency filter as equivalent to a Cat advanced filter may not protect your engine adequately. Always match the efficiency grade printed on the Cat filter or required by the engine's service manual.
Caterpillar Oil Filter Cross Reference for Skid Steers, Compact Equipment, and 3500 Series Engines
Skid Steer Loader Fitments: 1R-0734 and 377-6969
The Cat 1R-0734 filter fits a long list of Skid Steer Loader models: 252B, 287B, 262C, 236B, 248B, 297C, 272C, 262B, 256C, 277C, 246B, 287C, 246C, 267B, 279C, 268B, 289C, 277B, and 299C. For Cat 257B machines, field reports indicate that a 377-6969 filter is often used even though Cat specifies a 220-1523. According to user reports in Cat equipment forums, the 377-6969 has more filtering media but the same face and thread as the 220-1523, so it fits without issues. This kind of field-reported substitution is common, but verify with your Cat dealer or the official cross reference tool before deviating from the specified part.
Bobcat CT Series and Wix Equivalents
For Bobcat CT2025 and CT2035 compact tractors, Wix cross reference numbers include Wix 51381 for oil, Wix 51621 and 57098 for hydraulic, and Wix WF8059 for fuel. The Bobcat 7384298 oil filter also crosses to Wix 51381. Many owners reduce costs by using Wix or Donaldson equivalents, though some advise sticking with OEM while under warranty. These Wix numbers come from community sources; confirm against current Wix catalogs before ordering.
Captive 3500 Series Engine Lube Filters and Special Notes
For 3500 series engine lube filters, the application type determines the correct part. The 1R-0726 filter is specific to captive 3500 engines used in electric power, marine, and pump applications and is the preferred replacement for those configurations. Spin-on filters for the 3500 series, including 272-1788, 275-2604, and 244-4484, are primarily used in machine applications, with 275-2604 currently being the factory first-fit, per Caterpillar's published efficiency table. Running a caterpillar oil filter cross reference on a 3500 series engine without knowing whether it is a captive or machine application will likely produce the wrong result.
How to Use Efficiency Tables When Cross Referencing Cat Oil Filters
Standard vs. Advanced vs. Ultra-High Efficiency
Cat efficiency tables classify oil filters by media grade, and the table is your authoritative reference when a caterpillar oil filter cross reference produces multiple candidates. Standard efficiency filters are intended for engines manufactured before 2004, prior to emission regulations. Advanced efficiency filters provide enhanced filtration to capture smaller, more damaging particles in highly sensitive systems. Ultra-high efficiency filters use the most advanced media for increased efficiency while maintaining capacity. Per Caterpillar's published efficiency table, if a part is not listed in the table, there is no higher-grade filter option available, and you should refer to the online Parts book or SIS2GO.
Pre-2004 Engines and Factory First-Fit Filters
Most standard efficiency filters were factory first-fit during or after initial installation. The exception is the 3500 series engine lube filters, where regulations still allow the use of the 1R-0726 filter. This matters because older engines may still require a standard efficiency filter even though advanced filters exist. Cross referencing a pre-2004 Caterpillar engine to a modern ultra-high efficiency filter without checking the service manual can lead to incorrect bypass valve behavior or media loading issues.
All-Metal UHE+ Marine Filters
UHE+ all-metal filters feature a one-piece metal can that collects separated water internally, eliminating the need for an external water bowl. These are designed for marine and other demanding applications. Per Caterpillar's published efficiency table, filters 479-0855 and 479-0856 are identical to 438-5385 and 438-5386 but painted white for marine use to match Cat Marine engines. When running a caterpillar oil filter cross reference for a marine Cat engine, always confirm whether the white-painted marine variant is required by the application before ordering.
A reliable caterpillar oil filter cross reference saves time and prevents engine damage, but it must be used with dimensional verification, efficiency grade matching, and attention to special application notes. Combining the official Cat tool, aftermarket charts, and technical specifications gives you the confidence to select the right filter for any Caterpillar engine or machine. Shop OEM-quality spare parts with global 5-day delivery at 3genexport.com.
Frequently Asked Questions
Who manufactures the oil filters for Caterpillar trucks?
Caterpillar does not publicly disclose all of its filter manufacturers. Community discussions often claim that Baldwin Filters in Kearney, Nebraska, manufactures many Cat oil filters, and that some Cat part numbers are Baldwin filters painted yellow. This has not been officially confirmed by Caterpillar, so treat it as field observation rather than verified fact.
What is the difference between a Mopar oil filter and a CAT oil filter?
Mopar oil filters are designed for Chrysler, Dodge, Jeep, and Ram gasoline and diesel engines, while CAT oil filters are engineered for Caterpillar diesel and industrial engines. The two are not interchangeable. Cross reference charts list specific Mopar part numbers like Mopar L-52 only when a particular Cat filter has been verified to match that specific Mopar application.
What is the cross reference for the Caterpillar 1R-1808 engine oil filter with the NAPA engine oil filter?
The sources reviewed here do not publish a verified NAPA cross reference for the Caterpillar 1R-1808. Use the official Cat cross reference tool, input the Caterpillar part number or machine serial prefix, and cross-check the result with NAPA's online catalog directly to get a confirmed match.
What are the cross references for Caterpillar parts?
Caterpillar parts cross references are available through the official Cat Filter Cross Reference Tool, which accepts up to 50 competitor part numbers and searches by Cat machine model or serial number prefix. Aftermarket sources including Baldwin, Wix, Donaldson, Fleetguard, and Fram also publish caterpillar oil filter cross reference charts on their respective websites.
Can I use a Wix 51394 for all Caterpillar engines?
No. Wix 51394 is commonly mentioned for many Cat engines in community discussions, but it is not a universal fit. Always verify thread size, gasket diameter, bypass valve setting, and efficiency grade using the official Cat tool or the Wix application guide before installing on any specific machine.
Do Caterpillar oil filters have a bypass valve?
Yes. Caterpillar oil filters include a bypass valve that opens when the filter media becomes clogged or oil is cold. The bypass valve pressure rating is specific to each engine model and must match when running a caterpillar oil filter cross reference to an aftermarket filter.