Loading article…
Article Not Found
The article you're looking for doesn't exist or may have been removed.
Back to BlogKomatsu undercarriage parts are the track system components, including rollers, idlers, sprockets, chains, and shoes, that support and propel Komatsu dozers and excavators. Match each part to your exact machine model and application, then choose between Komatsu Genuine and verified aftermarket suppliers.
Key Takeaways
- undercarriage parts work as a system. Replacing only one worn component can accelerate wear on adjacent parts.
- The undercarriage can represent up to 50 percent of a machine's total maintenance expenses, according to Komatsu Europe.
- Common parts include track rollers, carrier rollers, idlers, sprockets, track chains, track shoes, adjusters, and recoil springs.
- Prices span a wide range: a track pad bolt can cost $2.50, while a Komatsu D85EX-15 track spring assembly lists at $3,830.
- Match the undercarriage configuration, whether conventional, general construction, cold weather, or swamp, to your actual job conditions.
- Komatsu Genuine undercarriage arrangements carry 4 years or 5,000 hours of coverage under the Komatsu Undercarriage Assurance program.
What Are Komatsu Undercarriage Parts?

this type of parts are the complete set of track system components that support a crawler machine and transfer engine power to the ground. For Komatsu dozers and excavators, this includes the track frame, track chain, rollers, idlers, sprockets, and track shoes. These components operate as a wear system: a failure in one part, such as a sprocket with worn teeth, can accelerate wear on the track chain and rollers simultaneously.
According to Komatsu America, the undercarriage category covers shoe assemblies, idlers, link assemblies, rubber tracks, track frame components, seals, sprockets, shoe bolt kits, and rollers. The company's parts portal lists 3,540 items under this category, ranging from individual bolts and nuts to complete track systems.
Main Components of a Komatsu Undercarriage
- Track roller (bottom roller) is a load-bearing wheel that supports the machine's weight against the track chain.
- Carrier roller (top roller) is a support wheel that carries the upper track chain on longer machines.
- Idler is a non-driven wheel at the opposite end of the sprocket that guides and tensions the track.
- Sprocket is a toothed drive wheel that engages track chain bushings to propel the machine.
- Track chain or link assembly is the connected series of links, pins, and bushings that forms the rail for the rollers.
- Track shoe is the grouser plate bolted to the track chain that contacts the ground.
- Recoil and adjuster assembly is a spring-loaded tensioning device that absorbs shock and keeps track tension within specifications.
VemaTrack, an aftermarket undercarriage specialist, lists Komatsu parts across sprockets and segments, track links, bottom and top rollers, track shoes, rubber tracks, rubber pads, idlers, tension devices, track guards, bucket teeth and wear parts, bolts and nuts, complete undercarriages, and final drives. This breadth shows that a complete this kind of parts order often spans multiple categories when a machine has high wear hours.
"An undercarriage is a wear system, not a single part. Replacing one component without assessing adjacent parts is the fastest way to turn a $244 roller into a $3,830 track spring failure." - 3GEN Export Technical Team
Why Undercarriage Selection Drives Total Cost

The undercarriage is one of the most expensive systems on any crawler machine, and selecting the wrong parts compounds that cost quickly.
Komatsu Europe states that the undercarriage can represent up to 50 percent of a machine's maintenance expenses. That figure appears consistently across OEM and dealer documentation. SMS Equipment, a Komatsu dealer, echoes that the undercarriage can account for up to 50% of lifetime maintenance costs and directly impacts performance, uptime, and total cost of ownership.
Because the undercarriage is a system, component choices are interdependent. A premium track chain paired with worn sprockets may still fail early. CTP describes undercarriage components as working as a system to move the machine in any type of terrain, and emphasizes that undercarriage parts can account for a large amount of the repair investment over machine life.
Cost Drivers Beyond the Part Price
- Application intensity: High-impact environments such as quarry, mining, demolition, and forestry wear components faster than general construction.
- Configuration: Cold weather, swamp, landfill, and abrasive-resistant variants may cost more upfront but extend service life in those conditions.
- Downtime: As VemaTrack notes, whenever a Komatsu is idle due to a broken undercarriage part, it costs money.
- Parts compatibility: A mismatch in pitch, link count, or sprocket tooth count can cause premature failure across the entire system.
Pros and Cons of OEM vs Aftermarket Komatsu Undercarriage Parts

Choosing between OEM and aftermarket komatsu undercarriage involves trade-offs in cost, warranty coverage, and availability. Here is how the two options compare in practice.
Pros
- OEM Genuine: Precision fit engineered to Komatsu specifications, 4-year or 5,000-hour warranty coverage, proven reliability across all machine generations.
- Premium Aftermarket (CTP, H&R, VemaTrack): Cast steel construction with heat treatment comparable to OEM, lower upfront cost, wide model coverage including older machines.
- Budget Aftermarket: Lowest entry price for individual wear parts, fast shipping, accessible fitment for legacy models like TD7 through TD10 series.
Cons
- OEM Genuine: Highest upfront price per component, may require longer lead times through dealer networks in remote regions.
- Premium Aftermarket: Warranty terms vary by brand and supplier; requires careful fitment verification against your serial number.
- Budget Aftermarket: Non-OEM parts may have shorter wear life in high-impact applications such as quarry, mining, or forestry; more fitment verification required before ordering.
What to Look For When Buying Komatsu Undercarriage Parts

When evaluating komatsu undercarriage parts, the most important criteria are material quality, model fitment, application configuration, and price tier. Use the following practical checklist before ordering.
Material and Heat Treatment
CTP describes its idlers as made of premium quality cast steel with special heat treatment for long durability. CTP track links use rail induction hardening to create excellent wear resistance. These manufacturing processes are reliable signals of durability in aftermarket components. Ask suppliers whether rollers use rotary friction welding or induction heat treatment before committing to an order.
Exact Fitment by Model
Komatsu dozers and excavators use different bolt patterns, link pitches, and sprocket tooth counts. Broken Tractor, for example, lists a 25-tooth drive sprocket for TD8, TD9, TD10, and D39 series dozers, and a 24-inch single grouser track shoe for D39PX and D41P series. Ordering from a supplier that verifies fitment against your serial number reduces returns and costly delays.
Application Match: Conventional, GC, or Specialty
SMS Equipment groups Komatsu undercarriage arrangements into Conventional/Standard and General Construction (GC). Conventional is designed for versatility and durability across all applications. GC is a cost-effective solution for light to medium-duty applications and is not recommended for high-impact environments such as waste, forestry, quarry, or mining. Cold weather, swamp, and landfill variants are also available for specialized operating conditions.
Rubber Tracks and Mini-Excavator Components
Compact excavators in the PC27MR through PC50MR range often use rubber tracks rather than steel chain systems. Rubber tracks reduce ground pressure, lower noise levels, and protect paved surfaces on urban job sites. Suppliers including VemaTrack and Rubber Tracks America stock rubber tracks and rubber pads specifically sized for Komatsu mini-excavators. Confirm track width, pitch, and link count before ordering, as these dimensions vary across compact models.
Price Range Expectations
Use real price anchors from supplier catalogs to plan budgets. A small part like a track pad bolt can cost $2.50 at Broken Tractor, while a heavy track spring assembly for a Komatsu D85EX-15 lists at $3,830 at H&R. Full track chain pairs for a D38E-1 dozer are listed at $2,225 for dry chains and $3,015 for sealed and lubricated chains at Rubber Tracks America. Obtain quotes for your exact model before budgeting.
How to Match Undercarriage Parts to Komatsu Dozers and Excavators
Matching komatsu undercarriage parts to your machine requires verifying each component against the others and the job environment. The combinations below are based on fitments listed by Broken Tractor and Rubber Tracks America.
Dozer Undercarriage Combination for D32/D38/D39 Series
- Bottom track roller – part number IN3490 listed at $244.00 by Broken Tractor.
- Top carrier roller – part number IN3511 listed at $198.00.
- Drive sprocket – part number IN3492 listed at $344.00.
- Track chain – two 37-link dry track chains listed at $2,225.00 by Rubber Tracks America for D38E-1; sealed and lubricated version at $3,015.00.
This combination works for standard, wide-track, and some LGP configurations when part numbers are verified against your serial number.
Compact Excavator Undercarriage Combination for PC30/PC35/PC50
- Top carrier roller – for PC40R-8 or PC30/PC50 at $125.00; for PC27MR-2 at $165.00; for PC35MR-3 at $215.00 at Rubber Tracks America.
- Bottom roller – for PC50MR-2 at $215.00; for PC30MR-1/2 and PC35MR-2 at $195.00 or $185.00 on sale.
- Sprocket – for PC35MR-3 with 12 holes and 23 teeth at $245.00.
Mixing single flange and double flange rollers requires close attention to the machine's frame and track chain style. Confirm flange type with your supplier before ordering.
Configuration Choice: Conventional vs General Construction
A conventional Komatsu undercarriage is designed for versatility and durability across a wide range of applications. A GC undercarriage is a cost-effective solution for light to medium-duty applications and is not recommended for high-impact environments such as waste, forestry, quarry, or mining, according to SMS Equipment. Choose conventional if your Komatsu works in rock, demolition, or forestry. Choose GC if your fleet operates on softer ground with lower impact loads.
Komatsu Undercarriage Parts Price Ranges and Buying Process
Prices for komatsu undercarriage parts span three broad tiers. The examples below come directly from supplier catalogs, so treat them as anchors rather than fixed quotes for every model.
Budget Tier: Individual Wear Parts
- Track pad bolt (9/16 x 2-3/16 in) at $2.50 – Broken Tractor.
- 24-inch track shoe at $64.00 – Broken Tractor.
- Bottom track roller at $244.00; top carrier roller at $198.00 – Broken Tractor.
- Drive sprocket at $344.00 – Broken Tractor.
Mid-Range Tier: Assemblies and Larger Components
- Two aftermarket track adjuster springs and recoil for Komatsu PC200-7 at $2,120.00 – Rubber Tracks America.
- One sprocket for D38E-1 dozer at $295.00 – Rubber Tracks America.
- Track spring assembly for Komatsu PC78MR-6/PC88MR-8 at $740.00 – H&R.
- Track spring assembly for Komatsu PC360LC-10/PC300-7 at $2,250.00 – H&R.
Premium Tier: Complete Track Chains and Heavy Components
- Two 37-link dry track chains for D38E-1 at $2,225.00; sealed and lubricated chains at $3,015.00 – Rubber Tracks America.
- Track spring assembly for Komatsu D85EX-15 at $3,830.00 – H&R.
- Track spring assembly for Komatsu PC450LCHD-8/PC490-10 at $2,800.00 – H&R.
Step-by-Step Buying Process
- Step 1: Record the Komatsu machine model, serial number, and current undercarriage configuration. Note bolt patterns, shoe width, track pitch, and sprocket tooth count.
- Step 2: Determine the application type, whether general construction, quarry, mining, forestry, or landfill, to choose conventional or specialty components.
- Step 3: Request quotes from at least two suppliers: one Komatsu dealer for genuine parts and one or two aftermarket specialists such as H&R, CTP, VemaTrack, Broken Tractor, or Rubber Tracks America.
- Step 4: Compare total cost including shipping, warranty, and expected wear life. Verify that aftermarket parts are non-OEM unless specified.
- Step 5: Confirm fitment with the supplier and check return policies before final purchase.
OEM vs Aftermarket: Where to Buy Komatsu Undercarriage Parts
You can source komatsu undercarriage parts through three main channels: Komatsu genuine dealer networks, premium aftermarket manufacturers, and budget aftermarket sellers. Each has clear advantages depending on your budget, machine age, and application.
| Option | Typical Source | Example Price/Feature | Pros | Cons |
|---|---|---|---|---|
| Komatsu Genuine (OEM) | Komatsu dealer, SMS Equipment | 4 years or 5,000 hours coverage on undercarriage arrangements | Precision fit, proven reliability, Komatsu engineering warranty | Usually highest upfront price |
| Premium Aftermarket | CTP, H&R, VemaTrack | H&R track spring assembly for D85EX-15 at $3,830 | High-quality cast steel and heat treatment, lower cost than OEM | Warranty varies by brand |
| Budget Aftermarket | Broken Tractor, Rubber Tracks America | Bottom roller $244; top roller $198; PC200-7 adjuster springs $2,120 | Lowest prices, fast shipping, fitment for older models | Non-OEM; requires thorough fitment verification |
Supplier Notes
- H&R Construction Parts lists over 702 undercarriage results across front idlers, recoil spring assemblies, rollers, sprockets, and tracks, with specialists available at 1-800-333-0650.
- Broken Tractor covers TD7 through TD10, D32 through D41, and Dresser 100/125 series dozers, with locations in Baton Rouge, Louisiana, and Kimbolton, Ohio.
- VemaTrack supplies sprockets, segments, links, rollers, shoes, rubber tracks, idlers, tension devices, guards, bucket teeth, bolts, complete undercarriages, and final drives worldwide.
- CTP (Costex) produces track rollers, carrier rollers, link assemblies, sprockets, idlers, bogies, equalizer bars, spring recoil, adjusters, shoes, guides, pins, bushings, rims, wheels, and rubber tracks.
"Undercarriage parts can account for a large amount of the repair investment you make over the life of the machine. For this reason, CTP offers the highest quality undercarriage replacement parts, while giving customers the ability to obtain significant savings." - CTP (Costex Tractor Parts)
OEM Part Number Lookup and Fitment Verification
Accurate part number lookup is the single most important step before ordering any komatsu undercarriage parts. A wrong part number costs you shipping time, restocking fees, and machine downtime.
Komatsu America's parts portal at komatsu.com allows you to filter by category, idler type, track link sub-type, carrier roller type, grouser configuration, and shoe bolt hole pattern. This level of filtering is essential because, for example, a conventional carrier roller and a cold weather carrier roller may share the same machine fitment but differ in seal material and internal clearances.
For aftermarket sourcing, suppliers like Broken Tractor and Rubber Tracks America list fitment by machine model and series directly on their product pages. Always cross-reference the supplier's listed part number against your machine's serial number plate before placing an order. Many suppliers will verify fitment on request before shipment, which eliminates most compatibility issues.
Pro Tip: Keep a fitment record for each machine in your fleet. Log the model, serial number, track pitch, shoe width, sprocket tooth count, and roller flange type. This record cuts ordering time significantly when a component fails unexpectedly in the field.
Care, Maintenance, and Final Buying Checklist for Komatsu Undercarriage Parts
Proper maintenance extends the service life of komatsu undercarriage parts and protects your investment across the entire track system.
Inspection and Cleaning
Clean the undercarriage regularly to remove abrasive mud, rocks, and debris. Inspect rollers, idlers, sprockets, and chain bushings for visible wear, cracks, and oil leaks. Check track tension daily because over-tight or loose tracks accelerate wear on pins, bushings, sprockets, and idlers alike.
Wear Measurement and Component Replacement
Measure track chain pitch, roller tread wear, sprocket tooth wear, and idler flange wear at scheduled intervals. Replace components before wear reaches critical limits. According to CTP, undercarriage parts work as a system; neglecting one worn component can damage adjacent parts and increase the overall repair investment significantly.
Final Buying Checklist
- Confirm the exact Komatsu model and serial number with the supplier before ordering.
- Verify undercarriage configuration: conventional, GC, cold weather, swamp, landfill, or abrasive resistant.
- Check material and heat treatment claims, especially for rollers and links.
- Compare OEM warranty (4 years or 5,000 hours) with aftermarket warranties from each supplier.
- Review return and shipping policies before purchase, particularly for international orders.
- For rubber tracks and mini-excavator components, confirm track width, pitch, and link count separately.
As of 2026, global supply chains for heavy equipment parts have stabilized considerably, and lead times for most komatsu undercarriage parts from established suppliers are shorter than they were in previous years. That said, specialty configurations like cold weather or swamp undercarriages may still require additional lead time. Plan accordingly.
Shop OEM-quality spare parts with global 5-day delivery at 3genexport.com.
Frequently Asked Questions
What are the components of a Komatsu undercarriage?
A Komatsu undercarriage includes track rollers, carrier rollers, idlers, sprockets, track chains, track shoes, adjusters, and recoil springs. These parts work together as a system to support and propel the machine across all terrain types.
What are the main parts of an excavator's undercarriage?
On a Komatsu excavator, the main undercarriage parts are the bottom rollers, top carrier rollers, front idler, sprocket, track chain with links and bushings, and track shoes. The recoil and adjuster assembly maintains correct track tension and absorbs ground shock during operation.
Where can I buy Komatsu undercarriage parts?
You can buy from Komatsu dealers for genuine parts, or from aftermarket suppliers such as H&R, CTP, VemaTrack, Broken Tractor, and Rubber Tracks America. For global procurement with fast delivery, 3genexport.com stocks OEM-quality komatsu undercarriage parts with worldwide shipping.
Are aftermarket Komatsu undercarriage parts as good as OEM?
Premium aftermarket parts from CTP, H&R, and VemaTrack often use cast steel and heat treatment comparable to OEM standards, but OEM parts carry Komatsu engineering specifications and a 4-year or 5,000-hour warranty. Budget aftermarket may have shorter wear life in high-impact applications such as quarry or mining work.
How much do Komatsu undercarriage parts cost?
Prices vary widely depending on the component and machine size. A track pad bolt may cost $2.50, a bottom roller $244, and a track spring assembly for a D85EX-15 $3,830. Best value depends on your application: for light-duty work, budget aftermarket can be cost-effective, while high-impact jobs benefit from OEM or premium aftermarket components.
How often should I replace Komatsu undercarriage parts?
Replacement intervals depend on application, ground conditions, and maintenance frequency. Track chains, sprockets, and rollers are wear items that should be measured at regular service intervals. Replace components before wear reaches critical limits to avoid cascading damage across the entire undercarriage system.