Marketplace of Heavy Machinery Spare Parts

2342731511, 234-27-31511 Pin Komatsu

$1,431.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 2342731511
Availability: In Stock
Komatsu pivot pin that sits in a bushed joint and takes the shear load as the linkage moves.

Description

The Komatsu 2342731511 pin, also written 234-27-31511, is a hardened cylindrical shaft that forms the axis of a pinned joint and turns inside a bushing. It weighs 10.48 kg, measured on our scale. How this pin wears A pivot pin is normally hardened and ground so that wear is concentrated in the cheaper bushing. Once the pin itself wears, the joint clearance opens up. These are the usual failure modes: Surface wear and scoring that enlarges joint clearance Bending or shear fatigue under shock loading Corrosion and pitting where the protective surface layer is breached Worn keeper plates or snap rings letting the pin walk out When to replace At service, check the pin for scoring, ovality and straightness, and keep the lubrication and retention hardware in good order. Replace the pin together with its mating bushing when either one exceeds the wear limit, because a new pin in a worn bushing will not hold the clearance.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and the tracking number is emailed once the order is dispatched.

What should I send to check this pin before ordering?

Send the number from your old pin, photos of the pin and its joint, and the machine serial number. We will compare them with this pin before you order.

Loading product...

Related Products