
2337025150, 233-70-25150 Spacer Komatsu
Description
The Komatsu 2337025150 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. This one sits in the circle reverse gear assembly. It is also written 233-70-25150. Net weight is 0.08 kg, measured on our scale. What it does in the stack A spacer positions gears and bearings along the shaft and carries clamp load through the stack. Its faces have to stay parallel and its length has to stay in tolerance, or the running clearances change. How it wears Face wear or fretting shortens the stack. Over-torque can deform it. Corrosion can bond it to the shaft or bore. A wrong-length substitute disturbs bearing preload. When you have it out Keep each spacer in its original position during disassembly and check the faces for fretting. Never pick a replacement by eye. A stack length error shows up later as a bearing or gear failure.
Frequently Asked Questions
How fast is shipping and does it cost anything?
Shipping is free on every order and ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to confirm this is the right spacer?
Send the machine's serial number and the part number of the spacer you are replacing. The reverse gear breakdown is split into serial number ranges, so the serial number tells us which group applies.