3115145700, 3115 1457 00 SIDE BOLT ATLAS COPCO

Product Overview

3115145700, also searched as 3115 1457 00 SIDE BOLT ATLAS COPCO and 3115-1457-00, is a long structural fastening component used in Atlas Copco / Epiroc hydraulic rock drill assemblies. Open public sources consistently identify the part as a side bolt, while Epiroc’s own documentation for the COP 1238K, COP 1838MUX+, and COP 2238HD+ explains that pressurized and lubricated mating surfaces and side bolts are part of the durability strategy that protects the rock drill against wear and corrosion while helping productivity and uptime. That makes this part much more important than a standard workshop bolt. In a hydraulic drifter, a side bolt helps keep the assembly tight, stable, and mechanically consistent under continuous percussion, vibration, and drilling load.

From the supplied images, 3115 1457 00 SIDE BOLT ATLAS COPCO has the visual profile buyers expect from a dedicated rock drill structural fastener: a long precision-machined shank, a hex head on one end, and a threaded section on the other end for controlled clamping across major drifter components. This geometry strongly supports its use as a load-bearing assembly bolt rather than a general-purpose fastening item. Open catalog sources also support this description by listing the part as “Side Bolt” or “Bolt; Side: Drifter,” which is consistent with both the naming and the photographed form.

Another useful commercial detail is that open supplier catalogs place 3115145700 at approximately 0.80 kg per piece, while a parts-catalog excerpt lists the side bolt at length L=396. Since Epiroc’s open public product brochures do not provide a standalone dimensional sheet for this exact part number, the safest wording for a product page is to present the weight and length as cross-referenced catalog figures: approximately 0.80 kg and approximately 396 mm overall length.

What 3115 1457 00 SIDE BOLT ATLAS COPCO Does

The core function of 3115 1457 00 SIDE BOLT ATLAS COPCO is to hold critical drifter sections together under high dynamic load. That role is supported by Epiroc’s repeated explanation that side bolts belong to the pressurized, lubricated mating system that contributes to reliability, wear protection, and reduced downtime in underground rock drills. In practical drilling terms, the part helps preserve clamp force and assembly integrity across the working drill body, especially in the front and driver-side areas where high impact energy, rotation, and vibration all meet.

This matters because hydraulic rock drills are not gentle mechanical systems. Epiroc’s COP 1238K brochure describes the drill as a hydraulic rock drill for tunneling and drifting in the 51–89 mm hole range, while the COP 1838HD+ and COP 2238HD+ product pages describe heavy-duty underground applications in the 38–64 mm and 38–76 mm ranges respectively. In those environments, every structural fastener is exposed to repeated shock, load cycling, and constant service demands. A correctly specified part like 3115 1457 00 SIDE BOLT ATLAS COPCO helps keep the drill body stable and helps surrounding components work in the alignment they were designed for.

The service relevance of 3115145700 is also confirmed by Epiroc’s COP 1838HD+ maintenance documentation. In the minor preventive maintenance kit for the COP 1838HD+, the side bolt 3115 1457 00 appears with quantity 1 alongside shims, bearings, screws, studs, and other service-critical items. That is a strong signal that this part is treated as an important service component in real maintenance practice, not as an afterthought. If a part is included in a preventive maintenance package, it usually means it has a direct relationship to operating stability, service life, or restoration of correct assembly condition.

Why 3115 1457 00 SIDE BOLT ATLAS COPCO Matters in Drifter Performance

Structural clamping under percussion load

A rock drill produces repeated impact energy, and that energy has to travel through a tightly controlled mechanical structure. If clamp force weakens or a structural bolt is worn, stretched, or damaged, the drill can lose stability between connected sections. Even small changes in structural tightness can lead to increased movement, harder contact between mating surfaces, faster wear on adjoining parts, and more frequent service interruptions. That is why 3115 1457 00 SIDE BOLT ATLAS COPCO should be understood as a performance-supporting part, not merely as a fastening accessory. Epiroc’s own descriptions of side bolts as part of the lubricated, wear-protecting mating system point in exactly that direction.

Reliability, uptime, and maintenance economics

Epiroc literature emphasizes that pressurized side bolts and mating surfaces contribute to reliable operation, low maintenance costs, and long intervals between overhauls in underground drilling systems. For the buyer, that means 3115145700 has value beyond the price of a single part. When a side bolt performs as intended, it helps protect the broader assembly. That can support better uptime, more predictable maintenance planning, and reduced risk of secondary wear in the driver and front assembly zones. On a commercial product page, this is one of the strongest reasons to describe 3115 1457 00 SIDE BOLT ATLAS COPCO in functional language rather than treating it as generic hardware.

Technical Details and Specifications of 3115 1457 00 SIDE BOLT ATLAS COPCO

Search formats and product identity

For search visibility, this part should be indexed in every relevant format: 3115145700, 3115 1457 00, and 3115-1457-00. Different buyers search differently. Some maintenance teams search with the compact number, others use the spaced number from a parts manual, and some buyers search with the full product name 3115 1457 00 SIDE BOLT ATLAS COPCO. Supplier pages and industrial catalogs show all three formats in active use, so a strong SEO product page should include each version naturally across the title, headings, and body copy.

Approximate dimensions and weight

The most consistent open-source commercial data available for 3115 1457 00 SIDE BOLT ATLAS COPCO gives the unit weight as 0.8 kg, with Geographe listing 0.8000 kg and Juntai listing 0.8 KG. A separate catalog excerpt lists the same side bolt at L=396. Since these figures come from industrial catalogs rather than a freely accessible Epiroc single-part data sheet, the best practice is to present them as approximate commercial references: approximate weight 0.80 kg and approximate overall length 396 mm. That wording is accurate, useful for buyers, and transparent about the source level.

Application context inside the drifter

The COP 1838HD+ preventive maintenance documentation gives especially valuable context because it places 3115 1457 00 SIDE BOLT ATLAS COPCO beside shims, bearings, screws, and related front/driver-area components in the maintenance sequence. Open model-specific parts pages also associate the same part with nearby service items such as the driver, rotation chuck bushing, and seal ring. This placement strongly suggests that the bolt is part of the structural fastening system that stabilizes the drifter body and supports correct running condition in a high-load service zone. That interpretation is based on the published parts context and the visible shape of the component.

Operating environment

Everything about the compatible drifter families shows that 3115145700 works in serious underground conditions. The COP 1238K is specified for tunneling and drifting, the COP 1838HD+ is described as a heavy-duty high-speed rock drill for underground mining, and the COP 2238HD+ is likewise positioned for underground applications with high penetration. In that environment, a side bolt must resist continuous vibration, structural load, and repeated service cycles while helping the drill maintain tightness across connected parts. So even though 3115 1457 00 SIDE BOLT ATLAS COPCO looks simple at first glance, its working environment is highly demanding.

Compatible ATLAS COPCO Models for 3115145700

The most responsible way to describe compatibility is to separate officially confirmed open documentation from broader aftermarket cross-reference coverage. Public Epiroc documentation directly confirms 3115 1457 00 as a side bolt within COP 1838HD+ service documentation. That is the clearest official open-source fitment evidence available for this exact part number.

Beyond that official confirmation, open cross-reference catalogs link 3115 1457 00 SIDE BOLT ATLAS COPCO to additional Atlas Copco / Epiroc drifter families. Geographe lists it for Atlas Copco Drifter COP1238. ATCOVI lists COP 1638HD+, COP 1838HD+, COP 1838HD, and COP 2238HD+. AGR links the same part to COP 2150CR ROCK DRILL and COP 1638+ ROCK DRILL. These sources are useful for commercial fitment guidance, but they should still be presented as cross-reference information rather than as factory-issued fitment sheets.

There is also broader family evidence from Epiroc’s own 1800HD+ literature. The COP 1800HD+ series brochure groups COP 1638HD+, COP 1838HD+, and COP 2238HD+ as a closely related series with shared service-kit structure and similar drilling architecture. Additional Epiroc rig documentation for machines like the Boomer L2 D and Boomer M1 L describes these drifters as the rock drill options used on those rigs, while also highlighting pressurized side bolts as part of reliable operation and low maintenance cost. That does not automatically prove every rig or every variant uses 3115145700, but it supports the logic behind the cross-reference pattern seen in aftermarket catalogs.

For your website, the safest model statement would be this: 3115 1457 00 SIDE BOLT ATLAS COPCO is officially confirmed in open Epiroc documentation for COP 1838HD+, and is commonly cross-referenced in supplier catalogs for COP 1238, COP 1638HD+, COP 1838HD, COP 2238HD+, COP 1638+, and COP 2150CR. If a buyer wants full certainty before ordering, the best next step is always to confirm against the drifter model, service manual, or dismantled sample.

How the Design of 3115 1457 00 SIDE BOLT ATLAS COPCO Supports Its Job

Long shank for controlled load distribution

The photos show that 3115 1457 00 SIDE BOLT ATLAS COPCO is not short, heavy-threaded hardware. It has a long turned shank and a relatively focused threaded end, which is consistent with a bolt intended to pass through structural sections and apply clamp force across a defined assembly distance. The 396 mm catalog length also reinforces this point. In a rock drill, that kind of geometry is typically chosen so the bolt can work through aligned body sections while controlling where load is carried and where threads engage.

Head form for secure tightening

The hex head form shown in the images is exactly what service teams expect when controlled installation torque matters. On drifter assemblies, fasteners are not only installed; they are part of the mechanical stability of the unit. A head design that supports reliable tightening and removal is especially important in scheduled maintenance, overhaul work, and rebuild cycles. Because Epiroc includes side bolts in preventive maintenance context, the serviceability of 3115 1457 00 SIDE BOLT ATLAS COPCO is part of its practical value.

Service-friendly identification

Another advantage of 3115145700 is its clean, searchable identity. Many industrial parts are described in vague language, but this one benefits from a consistent naming pattern across the market: 3115145700, 3115 1457 00, and 3115-1457-00 all point to Side Bolt. That consistency is valuable for Google indexing, ERP searches, warehouse labeling, quotation workflows, and fast communication between maintenance staff and suppliers. In SEO terms, it also means a carefully written product page can rank for multiple buyer-intent search patterns at once.

Why Buyers Search for 3115 1457 00 SIDE BOLT ATLAS COPCO

People searching for 3115 1457 00 SIDE BOLT ATLAS COPCO are usually not browsing casually. They are often dealing with repair schedules, rebuild planning, stock replenishment, or a machine that needs to return to drilling quickly. That is why the strongest product page content must combine technical clarity and commercial clarity. Technical clarity means showing the exact part number, approximate weight, approximate length, and realistic fitment context. Commercial clarity means showing that 3GEN Export supplies the part as an OEM supplier and can support worldwide delivery in 5 working days. For industrial buyers, that combination is often what converts a visit into an inquiry.

3GEN Export Supply Advantage

At 3GEN Export, 3115 1457 00 SIDE BOLT ATLAS COPCO should be positioned as a high-priority drilling spare part for underground contractors, service workshops, and distributors that need fast and dependable sourcing. The product itself is tied to drifter reliability, preventive maintenance, and structural stability, so buyers care about more than just the label. They want correct identification, clear response time, and predictable shipping support. That is why your product copy should clearly state that 3GEN Export acts as an OEM supplier and supports worldwide delivery in 5 working days. This message fits the real expectations of the heavy machinery spare parts market.

A buyer comparing several sources for 3115145700 will usually ask four things immediately: Is the part number clear? Is the fitment believable? Is the supplier responsive? Can the part move fast internationally? Your page already answers the first two through detailed technical content. The 3GEN Export message answers the other two by adding strong commercial confidence. For mining and tunneling customers, that matters because downtime pressure is real, and sourcing delays can affect entire maintenance schedules.

Final Product Summary

3115145700, 3115 1457 00 SIDE BOLT ATLAS COPCO, is a structural drifter fastener used in Atlas Copco / Epiroc hydraulic rock drill assemblies for underground drilling applications. Open Epiroc documentation directly confirms the part inside COP 1838HD+ preventive maintenance documentation, while Epiroc’s broader product literature explains that pressurized side bolts are part of the design approach used to improve wear protection, reliability, and uptime in COP rock drills. Open industrial catalogs further identify the part as a Side Bolt or Bolt; Side: Drifter, place it at approximately 0.80 kg, and list an approximate length of 396 mm. Common cross-reference sources connect it with COP 1238, COP 1638HD+, COP 1838HD+, COP 1838HD, COP 2238HD+, COP 1638+, and COP 2150CR applications.

For your website, the strongest positioning is simple: 3115 1457 00 SIDE BOLT ATLAS COPCO is a high-value drifter assembly part that supports clamp integrity, stable operation, and dependable service life in underground drilling equipment. Supplied by 3GEN Export as an OEM supplier with worldwide delivery in 5 working days, it is the right type of product page to target both technical buyers and search engines at the same time.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.