3128306181 HOLDER ATLAS COPCO (3128 3061 81)

If you’re trying to keep a rock drilling setup running smoothly, “small” structural parts like a holder can be the difference between stable routing and constant downtime. The 3128306181 HOLDER ATLAS COPCO is designed to secure, support, and guide components (typically hoses/cables/lines or mounted elements) so vibration, rubbing, and misalignment don’t turn into leaks, cuts, or premature wear.

As 3GEN Export, we supply this part as an OEM-quality solution and ship worldwide in 5 working days.

What the 3128306181 HOLDER ATLAS COPCO does

The 3128306181 HOLDER ATLAS COPCO (also searched as 3128 3061 81 HOLDER ATLAS COPCO and 3128-3061-81) is a precision-machined mounting holder/rail-style component used in heavy-duty drilling environments where continuous vibration and movement are normal.

From the product photos, the design shows:

• A long, straight body with multiple elongated mounting slots for alignment.

• A contrasting edge strip (often used as a wear interface or protective guide surface).

• A rigid profile made for repeatable positioning and load distribution.

In real terms, the 3128306181 HOLDER ATLAS COPCO helps keep routed components controlled, reducing friction points and movement that can damage hoses, protective sleeves, or mounted accessories—especially during feed travel and repetitive drilling cycles.

Why this holder matters in drilling operations

A drilling rig or rock drill system is basically a moving, vibrating machine that never stops “shaking hands” with rock. If routing and support are not controlled:

• Hoses can chafe and fail.

• Cables can kink or fatigue.

• Misalignment can cause uneven wear on guide surfaces.

• Operators see more unplanned stops and higher maintenance cost.

The 3128306181 HOLDER ATLAS COPCO is built to minimize these risks by keeping lines and mounted elements properly supported and consistently positioned.

Key design advantages of 3128306181 HOLDER ATLAS COPCO

1) Slot-based mounting for accurate alignment

The elongated mounting slots on the 3128306181 HOLDER ATLAS COPCO make installation more forgiving while still allowing precise alignment. That means you can “dial in” the position during assembly, which helps avoid twisting or forced routing.

2) Stable geometry for load spreading

A long holder distributes forces across multiple fasteners rather than concentrating stress at one point. In drilling environments, that load spreading reduces cracking, deformation, and loosening over time.

3) Wear-interface edge support

The edge strip visible on the 3128306181 HOLDER ATLAS COPCO is typically used to manage contact with adjacent surfaces (or to protect the holder body). This is valuable where movement and vibration could otherwise grind away at metal edges or routed lines.

4) Built for vibration-heavy cycles

Rock drilling machines operate under continuous shock and vibration. The 3128306181 HOLDER ATLAS COPCO is engineered to keep its form and fastening integrity under repeated cycles.

Technical overview and specifications (practical listing)

Because OEM technical sheets vary by serial range and machine configuration, the safest way to specify is by function and fit. Below is a practical spec set you can publish confidently, without over-claiming:

Technical details for 3128306181 HOLDER ATLAS COPCO

• Part Number: 3128306181

• Alternate Formats: 3128 3061 81, 3128-3061-81

• Product Type: Holder / mounting rail / support element

• Application Environment: Rock drilling rigs, drill feed / routing support areas

• Mounting Style: Multi-slot alignment mounting

• Approx. weight: 1.1 kg 
  (Weight can vary slightly by batch/finish/packaging—confirm if you need an exact shipping calculation.)

Compatible ATLAS COPCO / Epiroc models (common listings)

The 3128306181 HOLDER ATLAS COPCO is commonly listed for use across multiple rock drilling and rig platforms. A widely published compatibility list includes:

• BOOMER L2D

• BOOMER 282

• COP1840HE

• PV235

• L8-D65

• YH80

• FRT35-D7

You may also see this part referenced in market listings connected with Boomer/Boltec families (regional naming can differ).

Because drilling equipment often has configuration differences by serial number, the best practice is:

• Match part number + machine model + serial range before ordering.

• If you share the machine serial, you can confirm fitment against the correct parts book.

Where the 3128306181 HOLDER ATLAS COPCO is typically used

On many drilling systems, holders like this support routing and positioning across areas such as:

• Feed beam routing zones (where movement is constant)

• Hose/cable management lines near high-motion joints

• Structural mounting points that must stay aligned under vibration

• Protective interfaces where a guide edge reduces rub damage

In all these cases, the 3128306181 HOLDER ATLAS COPCO is doing one job: keeping critical items stable so everything else can work reliably.

Installation guidance

Below is a clean, practical install approach for the 3128306181 HOLDER ATLAS COPCO that fits most applications.

Tools you’ll typically need

• Torque wrench (matched to your fastener grade)

• Correct sockets/hex keys

• Thread locking compound (if specified by your maintenance standard)

• Straight edge for alignment

• Cleaning solvent and lint-free wipes

Step-by-step install

1. Lock out the machine

Shut down, isolate hydraulic/electric systems, and follow site safety rules.

2. Remove the old holder

If the previous holder is bent or cracked, inspect surrounding surfaces for damage (rub marks, sharp edges, misrouted lines).

3. Clean the mounting surface

Debris under a holder can create stress points and cause misalignment. Make sure the mounting surface is flat and clean.

4. Test fit the 3128306181 HOLDER ATLAS COPCO

Place the 3128306181 HOLDER ATLAS COPCO on the mounting surface and loosely install fasteners to confirm slot alignment.

5. Align for straight routing

Use the elongated slots to position the holder so hoses/cables/lines sit naturally—no forced bend, twist, or pinch.

6. Torque to specification

Tighten in sequence. Use the machine’s torque spec for the fastener class and mounting location (this is more reliable than guessing torque values).

7. Function check

Cycle the machine through movement range. Confirm no rubbing points and ensure clearance stays consistent.

Maintenance tips to extend service life

To keep the 3128306181 HOLDER ATLAS COPCO working properly for a long time:

• Inspect during routine service for rub marks and loosening fasteners.

• Watch for uneven wear on the edge interface—this can indicate misalignment.

• Replace before failure if you see cracking, deformation, or elongated slot damage.

• If the machine operates in wet or abrasive environments, clean and inspect more frequently.

A holder is a protective component—treat it like one, and it will protect higher-cost items around it.

Why buy from 3GEN Export

When you order the 3128306181 HOLDER ATLAS COPCO from 3GEN Export, you’re buying with operational priorities in mind:

• OEM-quality supply standard for fit and durability

• Export-ready packing for international shipments

• Worldwide delivery in 5 working days

• Fast sourcing support if you need cross-references for 3128 3061 81 HOLDER ATLAS COPCO format searches

If you want, send the machine model + serial range and we’ll help you confirm the correct fitment for 3128306181 HOLDER ATLAS COPCO before shipment.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.