
1446014530, 144-60-14530 Bushing Komatsu
Description
The Komatsu 1446014530 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It is also written 144-60-14530. On our scale it weighs 0.78 kg. What it does at the joint The bushing carries the radial load of the pin and sets the running clearance of the joint. It is a sacrificial part. It wears so the pin and the housing do not. Signs it needs replacing Play in the joint, caused by the bore wearing oval and the clearance growing Scoring or seizure marks, usually from poor lubrication or dirt getting in Uneven wear at one edge, which points to a misaligned pin or a bushing pressed in out of round Fretting or corrosion at the press-fit surface Fitting advice Check the grease path is clear and the seals that hold the lubricant are intact. Replace the bushing together with its pin as a matched set when clearance goes past the equipment maker's wear limit, not on its own, because a new bushing on a worn pin wears out quickly. Send us the number from your old bushing, or the machine's serial number, and we will confirm it is the right part.
Frequently Asked Questions
How long does delivery take and what does it cost?
Shipping is free on every order, to every destination. Every order ships with tracking, and delivery is typically 5–7 days door-to-door.