
23B2711480, 23B-27-11480 Spacer Komatsu
Description
The Komatsu 23B2711480 spacer is a small machined ring or block that weighs 0.06 kg on our scale. It is also written 23B-27-11480. What it does in the stack It positions bearings, gears and other elements along the shaft, carries the clamp load across the stack and sets the running clearances the design relies on. For that, its faces must stay parallel and its length must stay within tolerance. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation after over-torque Corrosion that has bonded it to the shaft or bore Replace a worn spacer rather than reusing it, because a shorter stack changes bearing preload and the damage shows up later in the bearings or gears. Fitting notes Keep each spacer in its original position when you take the assembly apart, and check the faces for fretting before refitting. Never pick a replacement by eye. A length error does not show at once, it turns up as bearing or gear failure.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and the tracking number is emailed once the order is dispatched.