
23B2711670, 23B-27-11670 Bushing Komatsu
Description
The Komatsu 23B2711670 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable surface to turn in. It is also written 23B-27-11670. What it does in the joint The bushing carries the load between the pin and its housing and sets the running clearance of the joint. It is built to take the wear so the housing does not. It weighs 0.6 kg, measured on our scale. Signs it needs replacing Play in the joint, because the bore has worn oval and the clearance has grown Scoring on the bore or the pin, which points to poor lubrication or dirt getting in Uneven wear on one edge, which means the pin is misaligned or the bushing was pressed in out of round Fretting or corrosion marks where the bushing sits in its seat Fitting advice Replace the bushing together with its pin once the clearance goes past the equipment maker's wear limit, not on its own. Keep the grease path clear and the seals that hold the lubricant in good condition, or the new bushing will score the same way. Send us the number on your old bushing and a photo of the worn part, and we will check it against this one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and goes by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.