
23B2731480, 23B-27-31480 Spacer Komatsu
Description
The 23B2731480 spacer is a Komatsu machined ring or block that holds two components a fixed distance apart on a shaft or bolted joint. It is also written 23B-27-31480. It weighs 0.06 kg, measured on our scale. What it does in the stack It carries clamp load through the stack and keeps parts in position along the axis. Its faces must stay parallel and its length must stay within tolerance, or the stack is no longer the length the design needs. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation from over-torquing Corrosion that has bonded it to the shaft or bore A spacer of the wrong length disturbs bearing preload, and the damage shows up later as bearing or gear failure. Never pick a replacement by eye. When you take the joint apart, keep each spacer in its original position and check its faces for fretting before you reuse it. To check the fit before ordering, send us the number from the old spacer and its measured length.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.