
23B2731580, 23B-27-31580 Stud Ball Komatsu
Description
The Komatsu 23B2731580 stud ball (also written 23B-27-31580) is a threaded fastener that clamps parts together through the tension in its thread. It sits in our Fasteners, Seals & Hardware range. Weight We weighed this part in-house: 1.98 kg net. How this kind of part wears A threaded fastener holds a joint by preload. Once the preload is lost, the joint starts to move and the thread takes the damage. The usual failure modes are: Loss of preload from embedding, gasket creep or vibration Stripped threads or tensile failure from over-torque, or from fitting a lower grade than the joint needs Fatigue cracking or hydrogen embrittlement in high-strength classes Galling and corrosion that seize the threads When to replace Replace the part if the thread is stripped, galled or corroded, or if it will not hold torque. Torque it to the joint specification and re-check critical joints after the first seating. Always refit the same property class or higher, never lower. Metric classes such as 8.8, 10.9 and 12.9 are defined in ISO 898-1.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to confirm this is the right stud?
Send the number stamped on the old part, a photo of it, and the serial number of your machine. Compare the old part's thread and overall size with our photos before ordering.