
7077680010, 707-76-80010 Bushing Komatsu
Description
This Komatsu 7077680010 bushing is a cylindrical plain bearing that lines a bore and gives a pin a low-friction, replaceable surface to turn in. It takes the wear so the housing does not have to. Our records link it to the arm and bucket cylinder and to the left-hand boom cylinder. It weighs 1.34 kg, measured on our scale. How a bushing wears The bore goes oval and the joint develops play, so the linkage loses alignment. Scoring or seizure follows when grease does not reach the joint or dirt gets in. Edge loading and fatigue show up when the pin sits out of line or the bushing was pressed in out of round. Fretting and corrosion attack the press-fit surface. When to replace it Check the joint for play and scoring at each scheduled service. Keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the machine maker's wear limit, not on its own, because a new bushing on a worn pin wears out fast. Part number 7077680010 Also written 707-76-80010 Brand Komatsu Category Pin & Bushing Weight 1.34 kg
Frequently Asked Questions
How is this bushing shipped and how long does delivery take?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to confirm this bushing is the right one?
Send the machine's serial number, the number on the worn bushing and a photo of it. With those we can confirm the match before you order.