
7077685140, 707-76-85140 Bushing Komatsu
Description
The Komatsu 7077685140 bushing is a cylindrical plain bearing that lines a bore, giving a pin and its housing a replaceable wear surface. It weighs 1.32 kg. What it does at the joint The bushing carries the radial load while the pin turns, and it sets the running clearance of the joint. It is built to wear so that the pin and the housing do not. How a bushing wears The bore goes oval as clearance grows, which shows up as slop and misalignment in the joint. Scoring and seizure follow when grease stops reaching the joint or dirt gets in. Edge loading and fatigue appear when the mating pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion attack the press-fit surface. When to replace it Check the joint at scheduled service for play and scoring, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the machine maker's wear limit. Fitting a new bushing on a worn pin brings the slop back quickly.
Frequently Asked Questions
How fast does an order arrive and what does it cost to ship?
Shipping is free, goes by air and comes with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check the fit before ordering?
Send the number on your old bushing and the serial number of the machine. The serial number lets us confirm the part before you order.