Marketplace of Heavy Machinery Spare Parts

17A5042110, 17A-50-42110 EQUALIZER BAR KOMATSU

$12,680.00
Brand: Komatsu
Category: Rubber & Suspension Components
Part Number: 17A-50-42110
Availability: In Stock
Transverse beam that ties a crawler tractor's two track roller frames to the main frame and pivots at its centre so the tracks can rise and fall independently.

Description

The Komatsu 17A5042110 equalizer bar is the cross beam of a crawler tractor undercarriage, also written 17A-50-42110. It carries the front-end load into both track frames and pivots on a centre pin, so one track can climb while the other stays down. Where it wears The centre pin, the bushings and the end pads or seats take the movement, and that is where problems start. End play at the centre pin and bushing, which you can measure. Worn pads or seats at the ends of the bar. Cracking at the centre boss after shock loads. A seized pivot where grease has stopped reaching it. When to replace Grease the pivots where they are fitted. Measure end play and pad wear at every undercarriage inspection. Renew the pins or rebush before the play starts hammering the bar seats. Send us the machine's serial number and the number on the bar you are removing, and we will confirm the match before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Should I renew the pins and bushings when I replace the bar?

Check them at the same time. The centre pin and the end bushings are the wearing parts of the pivot, and play in them will hammer the seats of a new bar. Measure the end play on the old pivot before you refit.

Loading product...

Related Products