
7077635010 , 707-76-35010 BUSHING KOMATSU
Description
The Komatsu 7077635010 bushing is a cylindrical plain bearing that lines a bore and gives a low-friction, replaceable wear surface between a pivot pin and its housing. Where it sits The parts catalogue places this bushing in hydraulic cylinder assemblies. The assembly sections that list it are: Front axle steering cylinder, left and right Dozer blade tilt cylinder Dozer blade angle cylinder Blade lift cylinder Multi-purpose bucket and grapple cylinder Tilting cover cylinder Tub cylinder How a bushing wears The bush is the sacrificial part of the joint. It takes the wear instead of the housing it lines. These are the usual ways it fails: The bore goes oval as it wears, which shows up as slop and misalignment in the joint. Scoring and seizure, from too little grease or dirt getting in. Edge loading and fatigue, where the pin is misaligned or the bush was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace Check the joint at scheduled service for play and scoring, and keep the grease path clear and the seals intact. Replace the bush together with its pin when clearance goes past the machine maker's wear limit. Changing the bush alone leaves a worn pin to eat the new one. Send us the machine serial number and the number on the old bush so we can confirm it before you order.
Frequently Asked Questions
How long does shipping take and is it tracked?
Shipping is free on every order and every shipment goes with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check the fit before ordering?
Send the machine serial number, the number on the old bushing and which cylinder it sits in, for example steering, blade tilt or blade angle. We confirm the match before you order.