
14X7112230, 14X-71-12230 BUSHING KOMATSU
Description
The Komatsu 14X7112230 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It is also written 14X-71-12230. In the parts breakdown it sits in the dozer frame and straight frame sections. What it does at the joint The bushing carries the load between the pin and its housing while the joint turns. It is built to wear first, so the pin and the housing do not. It also sets the running clearance of the joint. Signs it needs replacing Slop in the joint, from the bore wearing oval and the clearance growing. Scoring or seizure marks, which point to poor lubrication or dirt getting in. Uneven wear on one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit seat. Fitting notes Replace the bushing together with its pin once the clearance goes past the machine maker's wear limit, not on its own. A new bushing on a worn pin wears out quickly. Keep the grease path clear and the seals that hold the lubricant in place intact.
Frequently Asked Questions
What should I send to check this bushing against my machine?
Send us the machine's serial number and the part number 14X-71-12230. The serial number lets us confirm the fit before you order.
How long does shipping take and does it cost extra?
Shipping is free on every order, to every destination. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.