
14Y3018130, 14Y-30-18130 BUSHING KOMATSU
Description
The Komatsu 14Y3018130 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction wear surface that can be replaced. It is also written 14Y-30-18130. The bushing takes the wear so the pin and its housing do not have to. Where it sits Parts catalogue entries place this bushing in the track frame group. It appears in the track frame sections for the left-hand and the right-hand side, and in the track frame related parts section. Signs it needs replacing Joint slop: the bore wears oval and the pin moves more than it should, which throws the joint out of alignment. Scoring or seizure: usually points to a blocked grease path or dirt that got past the seals. Edge loading: wear concentrated at one end of the bushing, which happens when the mating pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion: damage at the press-fit surface. Keep the grease path clear and the seals that hold the lubricant in good condition. Send us the machine serial number and we can check the number before you order.
Frequently Asked Questions
Should I replace the pin when I replace the bushing?
Replace the bushing as a matched set with its pin when clearance goes past the equipment maker's wear limit, rather than changing the bushing alone.
How is the order shipped and how long does it take?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.