Marketplace of Heavy Machinery Spare Parts

23B7031540, 23B-70-31540 Shim 0.29Mm Komatsu

$132.00
Brand: Komatsu
Category: Fasteners, Seals & Hardware
Part Number: 23B7031540
Availability: In Stock
A 0.29 mm Komatsu shim that sets clearance or alignment between mating components in the drawbar circle group.

Description

The Komatsu 23B7031540 shim is a thin 0.29 mm spacer, also written 23B-70-31540, used in the drawbar circle group. It weighs 0.1 kg, measured on our scale. What a shim does here A shim is a calibrated spacer. Stacking or swapping shims is the designed way to take up tolerance and wear, so it sets clearance, preload or alignment between two parts. At 0.29 mm this one is a fine adjustment step, not a bulk spacer. Signs a shim needs replacing Thinning from fretting and compression, which opens up the clearance it was set to hold Corrosion that bonds shims together so the pack no longer reads its true thickness Burred or bent edges that stop the shim seating flat Shims lost or put back in the wrong order during a strip-down Fitting notes Renew a damaged shim with one of the same thickness. Do not substitute a different thickness unless you are re-measuring the adjustment afterwards. Re-check that adjustment after any change to the pack.

Frequently Asked Questions

What should I check before ordering this shim?

Measure the thickness of the old shim and compare it with 0.29 mm. If the shim came out of a pack, note how many were stacked together, because the pack thickness is what the adjustment depends on.

How long does shipping take?

Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and are typically 5–7 days door-to-door.

Loading product...

Related Products