Marketplace of Heavy Machinery Spare Parts

0420112 BUSHING HITACHI

$156.00
Brand: Hitachi
Category: Pin & Bushing
Part Number: 0420112
Availability: In Stock
A replaceable sleeve that lines a pin bore at a Hitachi pivot joint and takes the wear so the pin and housing do not.

Description

The Hitachi 0420112 bushing is a cylindrical plain bearing that lines a bore at a pin joint and gives the pin a low-friction, replaceable wear surface. It is a sacrificial part: it wears so the pin and the housing around it do not. How a bushing wears The usual failure is clearance growth. The bore goes oval, the joint develops slop and the pin starts to run out of line. Other causes are: Scoring or seizure when grease does not reach the joint or dirt gets in. Edge loading and fatigue when the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit surface. When to replace it Check for play and scoring at scheduled service, and keep the grease path clear and the seals intact. Replace the bushing together with its pin, not on its own, once clearance goes past the equipment maker's wear limit. A new bushing on a worn pin wears out quickly. Send us the machine serial number and the number on the worn bushing, and we will check the fit before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order goes by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products