
14X5000011, 14X-50-00011 EQUALIZER BAR KOMATSU
Description
The Komatsu 14X5000011 equalizer bar, also written 14X-50-00011, sits in the equalizer bar and pivot shaft group at the front of a crawler tractor's undercarriage. What it does on the machine The bar shares the front-end load between both track frames. Each track can still rise and fall on its own, so the shoes stay on the ground. The centre pin and the end pads or bushings are where it wears. Signs it needs attention End play at the centre pin and bushing that you can measure Worn pads or seats at the ends of the bar Cracks at the centre boss, usually after shock loads A pivot that has seized because it lost lubrication Keeping it in service Grease the pivots where they are fitted. At undercarriage inspections, measure end play and pad wear. Rebush or renew the pins before the play starts hammering the bar seats, because worn seats are the costly repair.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check this equalizer bar against my machine?
Send the machine's serial number and the number on the bar you are replacing. We compare them with 14X5000011 before you order.