Marketplace of Heavy Machinery Spare Parts

14Y3018160, 14Y-30-18160 SPACER KOMATSU

$390.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 14Y-30-18160
Availability: In Stock
Spacer from the equalizer bar and pivot shaft group in the Komatsu suspension.

Description

The Komatsu 14Y3018160 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. The number is also written 14Y-30-18160. What it does on the stack It holds the parts next to it at the right axial position and passes clamp load through the stack. For that to work, its faces must stay parallel and its length must stay true. The part weighs 0.86 kg. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation left by over-torquing Corrosion that has bonded it to the shaft or bore A spacer of the wrong length disturbs bearing preload, and the failure shows up later in the bearings or gears. So never pick a replacement by eye. When you take the stack apart, keep each spacer in its original position and check its faces for fretting. Send us the machine's serial number and the measured length of the old spacer, and we will check it before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products