Marketplace of Heavy Machinery Spare Parts

1545011171, 154-50-11171 BUSHING KOMATSU

$156.00
Brand: Komatsu
Category: Transmission & Drive Components
Part Number: 154-50-11171
Availability: In Stock
A plain-bearing bushing from the equalizer bar assembly, it gives the pivot pin a replaceable wear surface so the pin and housing do not wear.

Description

The Komatsu 154-50-11171 bushing is a cylindrical plain bearing that lines a bore and gives a moving pin a low-friction, replaceable wear surface. It is also written 1545011171. It sits in the equalizer bar assembly. What it does at the joint The bushing carries the radial load between the pin and its housing while the joint turns. It takes the wear itself, so the pin and the housing do not have to. It also sets the running clearance of the joint. How it wears The bore goes oval and the clearance grows, which shows up as slop and misalignment in the joint. Scoring and seizure follow when grease does not reach the joint or dirt gets in. Edge loading and fatigue appear where the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion attack the press-fit surface. When to replace it Check the joint at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals that hold the lubricant in good order. Replace the bushing when the clearance goes past the equipment maker's wear limit. Change it together with its pin rather than on its own, because a new bushing on a worn pin wears out early.

Frequently Asked Questions

How fast does an order arrive and what does it cost to ship?

Shipping is free and every order goes by air with tracking. Orders are prepared in 1–2 days and typically arrive 5–7 days door-to-door.

What should I send you to check the fit before ordering?

Send the part number 154-50-11171 together with your machine's serial number. A picture of the old bushing and the pin it runs on also helps us confirm the match.

Loading product...

Related Products