
1545071190, 154-50-71190 SPACER KOMATSU
Description
The Komatsu 1545071190 spacer, also written 154-50-71190, is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. It weighs 0.3 kg. Where it sits The parts book shows it in both the pivot shaft section and the shaft-and-bolt section of the equalizer bar and pivot shaft group. What a spacer has to do It positions the parts around it along the shaft and carries clamp load through the stack. Its faces must stay parallel and its length must stay within tolerance, or the stack is wrong. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation after over-torque Corrosion that has bonded it to the shaft or bore Keep each spacer in its original position when you take the joint apart. Do not substitute one by eye. A wrong length disturbs bearing preload, and the damage shows up later as bearing or gear failure. Before ordering, send us the number stamped on your old spacer and the machine's serial number so we can confirm it is the right one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.