Marketplace of Heavy Machinery Spare Parts

17-32-81450 PIN TRACK KOMATSU

$480.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 17-32-81450
Availability: In Stock
Pivot pin that carries shear load between two linked members while the joint turns inside its bushing.

Description

The Komatsu 17-32-81450 pin track is a pivot pin, also written 173281450. It is the hardened shaft at the centre of a pinned joint, and it runs against a bushing. How this pin wears A pin like this is normally hardened and ground, so the wear ends up in the cheaper bushing rather than in the pin. Once the surface is breached, clearance in the joint opens up. Watch for these failure modes: Surface wear and scoring that enlarges joint clearance Bending or shear fatigue under shock loading Corrosion and pitting where the protective surface layer is breached Worn keeper plates or snap rings, which let the pin walk out When to replace At service, check the pin for scoring, ovality and straightness, and keep the lubrication and retention hardware in order. Replace the pin together with its mating bushing when either one passes its wear limit. A new pin in a worn bushing wears out quickly. To confirm you are ordering the right pin, send us the number from your old pin and the serial number of your machine.

Frequently Asked Questions

How fast will this part ship, and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products