
175-27-31495 PINION
Description
The 175-27-31495 pinion is a Komatsu gear that sits in the final drive, the last reduction between the drive and the output. A gear like this transmits torque between shafts and changes speed and torque in proportion to its tooth count. Where it sits The catalogue places this pinion in the final drive case and in both the left hand and right hand final drive gear assemblies. How a final drive gear wears Load capacity and durability depend on tooth geometry, material and heat treatment. When a pinion like this gives up, it usually shows one of these: Pitting or micropitting on the tooth surface from contact fatigue Cracks or broken teeth at the tooth root after shock load Scuffing where the lubricant has broken down Spalling of the hardened case on the teeth Service notes Keep the correct lubricant grade and level. Look over the tooth surfaces for pitting and scuffing whenever the final drive is open. Treat abnormal noise or metal in the oil as a reason to investigate before the damage spreads. Replace meshing gears as a set. A new pinion running against a worn mate will not get the right contact pattern.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to confirm this is the right pinion?
Send the number stamped on the old pinion and we will check it against this one.