Marketplace of Heavy Machinery Spare Parts

175-61-15201 BUSHING

$160.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 175-61-15201
Availability: In Stock
A replaceable plain-bearing bush that lines the pivot bore in the Komatsu dozer blade lift cylinder support, at the yoke mounting and cylinder stay.

Description

The Komatsu 175-61-15201 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable wear surface. It is also written 1756115201. Where it sits The parts catalogue places this bushing in the dozer blade lift cylinder support group. That covers the yoke mounting and the lift cylinder stay. It is the joint where the lift cylinder pivots against its support, so it takes radial load every time the blade is raised or lowered. How this kind of part wears The bushing is the sacrificial part. It wears so the pin and the housing do not. These are the failures to look for: Bore wear that turns the bore oval, which shows up as slop and misalignment in the joint Scoring or seizure from too little grease or dirt getting in Edge loading where the pin is misaligned, or where the bushing was pressed in out of round Fretting and corrosion at the press-fit surface When to replace Check for play and scoring at each service. Keep the grease path clear and the seals intact. Replace the bushing together with its pin once the clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin running in a new bore. Send us the machine's serial number with this part number and we will confirm the fit before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

What should I send to check the fit?

Send the machine's serial number together with this part number. We answer enquiries within 24 hours.

Loading product...

Related Products