Marketplace of Heavy Machinery Spare Parts

175-63-12540 BUSHING

$212.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 175-63-12540
Availability: In Stock
Replaceable bushing that lines a pin bore in Komatsu lift and tilt cylinder assemblies.

Description

The Komatsu 175-63-12540 bushing is a cylindrical plain bearing that lines a pin bore, giving the joint a low-friction wear surface that can be replaced. It is also written 1756312540. Where it sits This bushing appears in the blade lift cylinder, power tilt cylinder and rotor lift cylinder assemblies. Signs it needs replacing Slop in the joint, caused by the bore wearing oval and the clearance growing. Scoring or seizure marks, which point to poor lubrication or dirt getting in. Uneven wear at one edge, which usually means the pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion at the press-fit seat. Fitting notes Keep the grease path clear and the seals that hold the lubricant in good order. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin chewing on the new one. To confirm the part for your cylinder, send us the number from your parts book and tell us which cylinder it is for.

Frequently Asked Questions

Is there a separate left and right version of this bushing?

The same number appears in both the left-hand and right-hand blade lift cylinder assemblies. Tell us which cylinder you are repairing and we will check it against your parts book.

How long does shipping take and does it cost anything?

Shipping is free and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products