
1752731420, 175-27-31420 Spacer Komatsu
Description
This Komatsu 1752731420 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or a bolted joint. It is also written 175-27-31420. Where it sits The number belongs to the final drive gear and shaft group. Parts in that group are stacked on a shaft, and the spacer sets the gap between them. The measured net weight of this part is 1.34 kg. What a spacer does It positions bearings and gears along the shaft, carries clamp load through the stack and sets the running clearances the design relies on. Its faces have to stay parallel and its length has to stay in tolerance, or the whole stack is out. Signs it needs replacing Worn or fretted faces, which shorten the stack Deformation after over-torque Corrosion that has bonded it to the shaft or bore Fitting a spacer of the wrong length changes bearing preload, and the damage shows up later as bearing or gear failure. Keep each spacer in its original position when you take the stack apart, check the faces for fretting, and never pick a replacement by eye. If you are unsure which spacer you need, send us the number from the old one and we will compare it.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order, and every order ships with tracking. Orders are prepared in 1–2 days and are in transit 4–5 days, typically 5–7 days door-to-door.