
1752731441, 175-27-31441 Bushing Komatsu
Description
The 1752731441 bushing from Komatsu is a cylindrical plain bearing that lines a bore and gives a pin and its housing a low-friction, replaceable wear surface. It weighs 2.04 kg, measured on our scale. What it does at the joint The bushing carries the radial load while the pin turns or slides inside it. It sets the running clearance of the joint and wears in place of the more expensive pin and housing, so it is meant to be changed when it is worn. Signs it needs replacing Slop or play in the joint, which comes from the bore wearing oval and the clearance growing. Scoring or seizure marks, usually from poor lubrication or dirt getting in. Edge wear on one side, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit seat. Fitting notes Keep the grease path clear and the seals that hold the lubricant in good condition, because dirt and dry running are what kill a bushing early. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, rather than changing it alone. Send us the number from your old bushing and the machine's serial number, and we will check it against this part before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.