
17A-50-12310 BUSHING
Description
The Komatsu 17A-50-12310 bushing, also written 17A5012310, is a cylindrical plain bearing that lines a bore in the equalizer bar assembly. It gives the pivot pin a replaceable wear surface to turn against. Where it sits This bushing belongs to the equalizer bar group. It appears in the standard equalizer bar assembly and in the cold weather spec version of it. It is a serviceable part: it wears so the bar and the pin bore do not. Signs it needs replacing Slop at the joint, which comes from the bore wearing oval and the clearance growing. Scoring or seizure marks, usually from lost grease or dirt getting past the seals. Uneven wear along one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion where the bushing seats in its bore. Replacing it Check the clearance and scoring at each scheduled service, and keep the grease path clear and the seals intact. When the clearance goes past the machine maker's wear limit, replace the bushing together with its pin as a matched set. Fitting a new bushing on a worn pin brings the slop back quickly. Send us the number 17A-50-12310 and the machine's serial number, and we will confirm the fit before you order.
Frequently Asked Questions
How long does shipping take and what does it cost?
Shipping is free. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.