Marketplace of Heavy Machinery Spare Parts

17A5011130, 17A-50-11130 BUSHING KOMATSU

$460.00
Brand: Komatsu
Category: Transmission & Drive Components
Part Number: 17A-50-11130
Availability: In Stock
Replaceable wear sleeve in the Komatsu track frame, shown in both the left-hand and right-hand frame assemblies.

Description

The Komatsu 17A5011130 bushing is a cylindrical plain bearing that lines a bore in the track frame. It gives the pin and its housing a low-friction, replaceable wear surface, so the wear lands on the bushing and not on the frame. Where it sits This bushing appears in the track frame assembly, in both the frame L.H. and the frame R.H. views. How a bushing wears A bushing carries radial load while the joint turns, and it sets the running clearance. Over time the bore goes oval and the joint gets sloppy. These are the usual signs and causes: Slop or play at the joint, with the bore worn out of round Scoring or seizure, usually from poor lubrication or dirt getting in Edge loading and fatigue where the mating pin is misaligned or the bushing was pressed in out of round Fretting and corrosion at the press-fit surface When to replace Check for clearance and scoring at scheduled service, and keep the grease path clear and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, not on its own. To confirm the fit, send us the machine's serial number and the part number from the old bushing.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order, and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products