
17A5011151, 17A-50-11151 SPACER KOMATSU
Description
The Komatsu 17A5011151 spacer is a machined ring or block that sets a fixed distance between two components on a shaft or bolted joint. It is also written 17A-50-11151. Where it sits The parts catalogue places this spacer in the pivot shaft group, under suspension. It weighs 1.2 kg. What a spacer does It positions the parts around it along the shaft, carries clamp load through the stack and sets the running clearances the design depends on. Its faces must stay parallel and its length must stay true, or the stack is wrong. Signs it needs replacing Worn or fretted faces that shorten the stack Deformation from over-torque Corrosion that has bonded it to the shaft or bore Keep each spacer in its original position when you take the joint apart, and check the faces for fretting. Never pick a replacement by eye. A length error shows up later as bearing or gear failure, so a wrong-length substitute disturbs bearing preload. Measure the length of your old spacer and send us that with the number so we can check the match.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order, and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.