Marketplace of Heavy Machinery Spare Parts

17A-50-42211, 17A5042211 BUSHING KOMATSU

$450.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 17A-50-42211
Availability: In Stock
A replaceable wear bush that sits in a pin joint and takes the wear so the pin and housing do not, from the Main Frame section of Komatsu parts.

Description

The Komatsu 17A5042211 bushing is a cylindrical plain bearing that lines a bore and gives a pin joint a low-friction wear surface you can replace. It is also written 17A-50-42211. Where it sits This bush is listed in the Main Frame section of the Komatsu parts book. It works as the sacrificial part in its joint: the bush wears so the pin and the housing do not. How a bushing wears Clearance growth: the bore goes oval and the joint develops slop and misalignment. Scoring and seizure: caused by poor lubrication or dirt getting past the seals. Edge loading and fatigue: when the pin is misaligned or the bush was pressed in out of round. Fretting and corrosion: at the press-fit surface. When to replace Check the joint at scheduled service for play and scoring, and keep the grease path clear and the seals intact. Replace the bush when clearance goes past the equipment maker's wear limit. Change it together with its pin as a matched set. A new bush on a worn pin wears out quickly.

Frequently Asked Questions

What should I send to confirm this is the right bushing?

Send the machine model and serial number along with the number on the worn bush. We will check it against the part number before you order.

How long does shipping take and does it cost anything?

Shipping is free on every order, and every order ships by air with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products