
17M5041140, 17M-50-41140 PIN KOMATSU
Description
The Komatsu 17M5041140 pin is a pivot pin from the equalizer bar and pivot shaft group and the track frame side pin group, left-hand and right-hand. It is also written 17M-50-41140. What it does in the joint A pivot pin is a hardened cylindrical shaft that runs inside a bushing and carries shear load between two linked members while the joint swings. It is ground and hardened so that wear lands on the cheaper bushing rather than on the pin. Signs it needs replacing Scoring or wear marks that open up the joint clearance Bending, or cracks from shock loading Corrosion pitting where the surface layer has been breached Worn keeper plates or snap rings that let the pin walk out At service, check the pin for scoring, ovality and straightness, and keep the lubrication and retention hardware in order. Replace the pin together with its mating bushing when either one is past its wear limit, because the two wear as a pair. Send us the machine serial number and the number on the old pin so we can confirm it is the right one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.