
1955000182, 195-50-00182 EQUALIZER BAR KOMATSU
Description
The Komatsu 1955000182 equalizer bar, also written 195-50-00182, sits in the equalizer bar and pivot shaft group of the parts breakdown. It pivots at its centre. The centre pin and the end pads or bushings are where it wears. Signs it needs attention End play at the centre pin and bushing, which you can measure. Wear on the pads or seats at the ends of the bar. Cracking at the centre boss, which comes from shock load. A seized pivot, usually after the grease has stopped reaching it. What to check at inspection Grease the pivots where they are fitted. Measure end play and pad wear at your undercarriage inspections. Rebush or renew the pins before the play starts hammering the bar seats, because a worn seat costs more to put right than a pin. A bar that is cracked at the centre boss should be replaced, not repaired.
Frequently Asked Questions
What should I send to check this equalizer bar before ordering?
Send the number from the bar you are replacing and your machine's serial number. If the old bar is cracked or worn, a clear picture of the centre boss and both ends helps us confirm it.
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.