Marketplace of Heavy Machinery Spare Parts

1957161390, 195-71-61390 PIN KOMATSU

$1,480.00
Brand: Komatsu
Category: Transmission & Drive Components
Part Number: 195-71-61390
Availability: In Stock
A Komatsu pivot pin from the dozer frame assemblies, used in the frame joints on the left and right sides and in the tilt frame.

Description

The Komatsu 1957161390 pin is a hardened pivot pin that forms the axis of a pinned joint in the dozer frame. It weighs 25.9 kg. Where it sits This pin appears in the dozer frame, frame left-hand and frame right-hand assemblies. It also appears in the straight tilt frame and the reinforced straight tilt frame sections. What the pin does The pin carries shear load between the frame members while the joint swings. It runs inside a bushing and is made harder than the bushing, so most of the wear should end up in the bushing and not in the pin. Signs it needs replacing Scoring or a worn, out-of-round surface that opens up the joint clearance A bent pin, or cracks from shock loading Pitting or corrosion where the surface layer has broken through Worn keepers or snap rings that let the pin walk out Check the pin for scoring, ovality and straightness at service. Replace it together with the mating bushing when either one is past its wear limit, because a new pin in a worn bushing wears out quickly.

Frequently Asked Questions

What should I send to check I am ordering the right pin?

Send the part number, 1957161390 or 195-71-61390. A photo of the old pin helps us compare.

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products