Marketplace of Heavy Machinery Spare Parts

2037042182, 203-70-42182 BUSHING KOMATSU

$172.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 203-70-42182
Availability: In Stock
Komatsu bushing that sits in the arm assembly and takes the pin wear, so the arm bore does not.

Description

The Komatsu 203-70-42182 bushing is a cylindrical plain bearing that lines a bore in the arm assembly and gives the pin a replaceable wear surface. Where it sits This bushing belongs to the arm. It appears in several arm assemblies, including the 1-actuator, long, short, heavy duty and 100 hours greasing type arms. Because it takes the wear, the arm bore behind it stays intact. How it wears A bushing wears first, and that is its job. These are the signs to look for: Growing clearance. The bore goes oval and the joint gets sloppy and loses alignment. Scoring or seizure. This points to poor lubrication or dirt getting into the joint. Edge loading. A misaligned pin or a bushing pressed in out of round loads one edge and fatigues it. Fretting and corrosion. These show up at the press-fit surface. When to replace it Check for clearance and scoring at scheduled service. Keep the grease path clear and the seals that hold the lubricant in place intact. Once clearance goes past the equipment maker's wear limit, replace the bushing together with its pin. Changing the bushing alone leaves a worn pin chewing up the new one. Send us the number stamped on your old bushing and the machine's serial number, and we will confirm it before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products