Marketplace of Heavy Machinery Spare Parts

2057072130, 205-70-72130 BUSHING KOMATSU

$164.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 205-70-72130
Availability: In Stock
A wear sleeve that lines a pivot pin bore in the arm linkage and takes the wear in place of the arm itself.

Description

The Komatsu 205-70-72130 bushing is a cylindrical plain bearing that lines a pin bore and gives the joint a low-friction, replaceable wear surface. It is also written 2057072130. Where it sits The parts catalogue places this bushing in the arm area: arm, arm extension, short arm, super short arm, extension arm and rotation arm assemblies. At those pin joints it carries the radial load while the pin turns, and it sets the running clearance of the joint. How a bushing wears The bore goes oval as clearance grows, which shows up as slop and misalignment at the joint. Scoring and seizure follow when grease stops reaching the joint or dirt gets in. Edge loading and fatigue appear where the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion attack the press-fit surface. When to replace Check the bushing at scheduled service for measurable clearance and scoring, and keep the grease path clear and the seals intact. Replace it when clearance passes the equipment maker's wear limit. Fit it together with its pin as a matched set, not on its own, because a new bushing on a worn pin wears out fast. To check the fit, send us the machine's serial number and the number stamped on the old bushing.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products