
205-70-72180 BUSHING
Description
The Komatsu 205-70-72180 bushing is a cylindrical plain bearing that lines a bore and gives a replaceable wear surface between a pivot pin and its housing. The same number is also written 2057072180. Where it sits This bushing belongs to the arm group. It appears in several arm versions: standard arm, short arm, super short arm, long arm and heavy duty arm. It also appears in arm assemblies with a 100 hours greasing type and in arms with additional piping. What it does The bushing carries the radial load of the pin joint while the joint turns. It wears so that the pin and the housing do not. It also sets the running clearance of the joint. Signs it needs replacing Slop in the joint, which comes from the bore wearing oval and the clearance growing Scoring on the bore or the pin, usually from poor lubrication or dirt getting in Uneven wear along one edge, which points to a misaligned pin or a bushing pressed in out of round Fretting or corrosion marks at the press-fit seat Fitting notes Keep the grease path clear and the seals that hold the lubricant in good order, because dirt and dry running are what kill a bushing early. Replace the bushing together with its pin when the clearance goes past the equipment maker's wear limit. A new bushing on a worn pin wears out quickly.
Frequently Asked Questions
What should I send you to confirm this is the right bushing?
Send the part number 205-70-72180 together with the arm version you are repairing and the machine's serial number. We check them against the arm group before you order.
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1-2 days and in transit 4-5 days, typically 5-7 days door-to-door.