Marketplace of Heavy Machinery Spare Parts

206-70-55160 PIN

$570.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 206-70-55160
Availability: In Stock
Pivot pin for the boom foot mounting, where it joins the boom to the machine and runs in its bushing.

Description

The Komatsu 206-70-55160 pin is a pivot pin for the boom foot mounting, also written 2067055160. It sits in the boom pins and bushings group, at the joint where the boom pivots. What it does at the boom foot The pin is a hardened shaft that forms the axis of the joint. It carries shear load between the boom and its mounting while the boom swings. It runs against a bushing and is made harder than the bushing, so wear collects in the cheaper part. Signs it needs replacing Scoring or wear on the pin surface that opens up joint clearance Bending, or cracks from shock loading Pitting where the surface layer has broken through A pin that works loose because the keeper plates or snap rings are worn Check the pin for scoring, ovality and straightness whenever the joint is serviced. Keep the joint greased and the retention hardware in good order. When the pin or its bushing is past the wear limit, replace both together. A new pin in a worn bushing wears out fast. To confirm you are ordering the right pin, send us the old pin's length and diameter, or the machine's serial number.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order, to every destination, and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products