Marketplace of Heavy Machinery Spare Parts

207-32-61190 PIN TRACK MASTER

$220.00
Brand: Komatsu
Category: Pin & Bushing
Part Number: 207-32-61190
Availability: In Stock
Track pin that sits in the Komatsu track link and track shoe assemblies with sealed and greased links.

Description

The Komatsu 207-32-61190 pin track master is a pin used in the track link and track shoe assemblies, where it forms one of the pinned joints that let the track chain articulate. Our catalogue places it in assemblies with sealed and greased links and holed triple grouser shoes. It is also written 2073261190. How this kind of pin wears A pivot pin is the hardened shaft inside a pinned joint. It runs against a bushing and carries shear load while the joint turns. It is hardened and ground so that most of the wear lands on the cheaper bushing. These are the failures to look for: Scoring and surface wear that opens up the joint clearance Bending or shear fatigue after shock loading Corrosion and pitting where the protective surface has broken through Worn keeper plates or snap rings that let the pin walk out When to replace Check the pin for scoring, ovality and straightness at service, and keep the joint lubricated. Replace the pin together with its mating bushing once either one is past its wear limit, because a new pin in a worn bushing wears out quickly. To confirm the right part, send us the number from the old pin and the machine's serial number.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products