
207-70-33160 BUSHING
Description
The Komatsu 207-70-33160 bushing is a cylindrical plain bearing that lines a bore at the arm and bucket link pivot. It gives the pin a low-friction wear surface and sets the running clearance of the joint. What it does at the joint The bushing carries the radial load while the pin turns inside it. It is a sacrificial part: it wears so the pin and the housing do not. That is why it is made to be pressed out and replaced. Signs it needs replacing Slop in the joint, which comes from the bore wearing oval and letting the pin move. Scoring on the bore, or a joint that has seized. Both point to poor lubrication or dirt getting in. Uneven wear along one edge, which shows the pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion marks where the bushing sits in its bore. Fitting it Keep the grease path clear and the seals that hold the lubricant in good order, or the new bushing will wear the same way. Replace the bushing together with its pin when clearance goes past the equipment maker's wear limit, not on its own. A new bushing on a worn pin picks up the old play straight away. Send us the number from the old bushing and your machine's serial number, and we will confirm the fit before you order.
Frequently Asked Questions
How long does shipping take?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.