
2077072460, 207-70-72460 BUSHING KOMATSU
Description
The Komatsu 207-70-72460 bushing is a cylindrical plain bearing that lines a bore at a pivot pin joint, also written 2077072460. It gives the pin a low-friction, replaceable surface to turn against. Where it sits Komatsu parts diagrams place this bushing in the arm group, in the arm-and-bushing assemblies for the 2200 mm, 2600 mm, 3200 mm and 4000 mm arm versions. How it wears The bushing is the sacrificial part of the joint. It takes the radial load so the arm bore and the pin last longer. These are the ways it fails: The bore wears oval and the joint develops slop and misalignment. Poor lubrication or dirt getting in scores the surface and can seize the joint. A misaligned pin, or a bushing pressed in out of round, overloads the edges and leads to fatigue. Fretting and corrosion attack the press-fit surface. When to replace Look for play at the pin, scoring in the bore, or a bushing that has gone out of round. Keep the grease path clear and the seals that hold the lubricant in place intact. Replace the bushing together with its pin once clearance goes past the machine maker's wear limit. A new bushing on a worn pin wears out quickly.
Frequently Asked Questions
How long does shipping take and what does it cost?
Shipping is free, goes by air and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to confirm this is the right bushing?
Send the number stamped on the old bushing and the machine's serial number. The serial number confirms the part before you order.