
2087061460, 208-70-61460 BUSHING KOMATSU
Description
The Komatsu 208-70-61460 bushing, also written 2087061460, is a cylindrical plain bearing that lines a bore and gives a pin joint a replaceable wear surface. Where it sits This bushing belongs to the arm and bucket link assemblies. At a joint like that, the bushing wears instead of the arm or link bore, so it is the part you change when the joint loosens. Signs it needs replacing Slop in the joint, caused by the bore wearing oval and the clearance growing. Scoring or seizure, usually from poor lubrication or dirt getting in. Uneven edge wear, where the mating pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion at the press-fit seat. Fitting it Keep the grease path clear and the seals that hold the lubricant in place intact, or a new bushing will wear the same way. Replace it when the clearance goes past the equipment maker's wear limit, and do it together with the pin rather than on its own. Send us the number from your old bushing and we will check it against this one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every shipment is tracked. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
Should I replace the pin when I replace this bushing?
Yes, replace the bushing as a matched set with its pin once the clearance exceeds the equipment maker's wear limit, rather than changing the bushing in isolation.