
2087074170, 208-70-74170 BUSHING KOMATSU
Description
The Komatsu 208-70-74170 bushing is a cylindrical plain bearing that lines a bore, so a pin and its housing wear against a replaceable part instead of against each other. Where it sits Komatsu parts listings place this bushing in the bucket group: the bucket, the bucket and side cutter, and the bucket tooth and side shroud sections. It is a bucket-end wear part, and it takes the wear so the more expensive pin and housing do not. Signs it needs replacing Joint slop: the bore has worn oval and the pin moves where it should be held. Scoring or seizure: the grease path is blocked or dirt has got past the seals. Edge loading: wear is concentrated on one side because the pin is misaligned or the bushing was pressed in out of round. Fretting or corrosion: damage at the press-fit surface. Replacing it Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, not on its own. A new bushing on a worn pin wears out quickly. Keep the grease path clear and the seals intact so the new bushing is not scored by dirt.
Frequently Asked Questions
How long does shipping take and what does it cost?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check I am ordering the right bushing?
Send the number 2087074170 or 208-70-74170 together with the serial number of the machine. Email [email protected] and we answer enquiries within 24 hours.