
2097052141, 209-70-52141 BUSHING KOMATSU
Description
The Komatsu 209-70-52141 bushing is a cylindrical plain bearing that lines a bore in the arm joint, giving the pin a low-friction, replaceable wear surface. It is also written 2097052141. Where it sits Our catalogue places this bushing in the arm groups, including the arm, the arm and pin group, and the arm less parts group. It belongs to the pin joints of the arm, where it carries the radial load while the joint turns. How a bushing wears The bushing is the sacrificial part of the joint. It wears so the pin and the arm bore do not. These are the failures to look for: Clearance growth: the bore goes oval and the joint develops slop and misalignment. Scoring and seizure: caused by poor lubrication or dirt getting into the joint. Edge loading and fatigue: happens when the pin is misaligned or the bushing was pressed in out of round. Fretting and corrosion: shows up at the press-fit surface. When to replace Check the joint at scheduled service for measurable clearance and scoring. Keep the grease path clear and the seals that hold the lubricant in place intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing alone leaves a worn pin running in a new bore. Send us the machine serial number and the part number from your old bushing, and we will check it against this one before you order.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.